-
8th April 2015, 09:30 AM
#11
Its all supply and demand.. I have seen the calipers for from $150-450 a set.
They seem to get snapped up pretty quickly. Make sure you get the bolts with them and you will need new rotors and pads. I would also put a seal kit through them as well as you just don't know what condition they are actually in on the inside. I have seen calipers that looked OK on the outside, but once you pull them apart its a different story.
When I did the upgrade, I pulled mine apart and there was quite a bit of gunk in them, but luckily the pistons were fine and all went back together with new seals perfectly.
Last edited by doka404; 8th April 2015 at 09:35 AM.
-
-
8th April 2015 09:30 AM
# ADS
Circuit advertisement
-
8th April 2015, 09:33 AM
#12
The 747
Yeah I'll definitely be doing a seal kit when I find some. Thanks for that though.
You're not wrong about them getting snapped up quickly, saw somebody wrecking one on facebook last night, I got in within 5 minutes of being posted and he said somebody had already claimed them.
Last edited by Winnie; 8th April 2015 at 09:37 AM.
-
-
10th April 2015, 10:12 AM
#13
The 747
-
-
10th April 2015, 12:59 PM
#14
Patrol God
Im going down to a 4x4 shop very soon to talk about my intake I'll
ask about some 2 pot calipers while I'm there for you.
He does a lot of mods and mainly only Patrols.
04 ST 3lt auto, not enough Mods to keep me happy, but getting there
-
-
10th April 2015, 01:46 PM
#15
The 747
Originally Posted by
threedogs
Im going down to a 4x4 shop very soon to talk about my intake I'll
ask about some 2 pot calipers while I'm there for you.
He does a lot of mods and mainly only Patrols.
Thanks John. Patrolapart have a 2nd hand set for $450 but that's a bit more than I want to spend at a moment
-
-
10th April 2015, 03:03 PM
#16
Patrol God
If Andrew has some it wont be that high, fingers crossed though
04 ST 3lt auto, not enough Mods to keep me happy, but getting there
-
The Following User Says Thank You to threedogs For This Useful Post:
-
10th April 2015, 03:06 PM
#17
The 747
Thanks mate that'd be great
-
-
10th April 2015, 04:24 PM
#18
Patrol God
Are you doing all four or just the front???
Sorry for delay mate just dropped off some fire wood
04 ST 3lt auto, not enough Mods to keep me happy, but getting there
-
-
10th April 2015, 05:20 PM
#19
The 747
Originally Posted by
threedogs
Are you doing all four or just the front???
Sorry for delay mate just dropped off some fire wood
Just the front mate as the rears are the same. Only after 2nd hand and I will be rebuilding them regardless so they don't need to be in great condition
-
-
11th April 2015, 08:24 AM
#20
Originally Posted by
Winnie
Pretty sure they won't fit mate
-