question about vdo boost gauge.

**Timbo15** · 5th April 2015, 08:15 AM

Hi guys/gals need a bit of insight on this one.

I have a vdo boost gauge and installation was easy enough but are they meant to emit a leaking air noise that gets stronger with more boost or do i have to tighten the boost line fitting more?

Thanks for any info/help.

**NissanPatrol.com.au** · 5th April 2015 08:15 AM

**krbrooking** · 5th April 2015, 08:30 AM

I would suggest that it should not be sucking any air. Could be wrong though.

Sent from my iPhone using Forum Runner

**threedogs** · 5th April 2015, 08:33 AM

If it has a brass olive you place on the tubing before the nut ,
then you will need to nip it up so it squashes slightly

**Cuppa** · 5th April 2015, 04:36 PM

They also have a small nyon ‘restrictor’ to fit inside the tube - part no 10027 - see pic. Not sure if it would cause the issue you have if missing, but does apparently stop the needle from being too ‘jumpy’.

**Timbo15** · 6th April 2015, 02:18 PM

Thanks guys for the help. Cuppa the nylon restrictor was the part I needed to install, only took a while to find where it was hiding.

**Cuppa** · 6th April 2015, 08:58 PM

So anyone wanna buy my VDO boost gauge as pictured above?

User Tag List

Thread: question about vdo boost gauge.

Thread Tools

Display

question about vdo boost gauge.

The Following User Says Thank You to krbrooking For This Useful Post:

The Following User Says Thank You to threedogs For This Useful Post:

The Following User Says Thank You to Cuppa For This Useful Post:

The Following 2 Users Say Thank You to Timbo15 For This Useful Post:

Posting Permissions