-
14th December 2014, 12:09 PM
#1
Advanced
coolant coming out of exhaust
Okay, so I am losing coolant through my exhaust. Would this be a head issue or head gasket issue. Had head work done 20000 km 2 years ago. Any thoughts guys?
-
-
14th December 2014 12:09 PM
# ADS
Circuit advertisement
-
14th December 2014, 12:11 PM
#2
Patrol Freak
Either way - the head has to come off.
-
-
14th December 2014, 12:27 PM
#3
Advanced
Figured that, just hoping it's only the gasket. Hoping for a miracle at Christmas time I guess lol
-
-
14th December 2014, 12:33 PM
#4
Patrol Freak
In that case - ho, ho, ho! No - Really - good luck. It may just be a gasket, but still a lot of work and you would still get the head tested and machined. It would be a waste of money otherwise.
-
-
14th December 2014, 01:11 PM
#5
Patrol God
If it's still running ok I'd say gasket.
But fingers crossed mate
-
-
14th December 2014, 01:29 PM
#6
Legendary
Mate, as a machinery mechanic, albeit small motors, I wouldn't change a head gasket without having the head at least skimmed. The cost in labour and time is in taking the head off and putting it back on again. Once you get that far its not too much extra to get it to a machinist and get it checked and planed. Might just stop it from doing the same thing again.
2005 GU IV ST 3.0. Snorkel. Roof rack. Awning. Spots. Welded I/C. Dual batteries & VSR. UHF. Barn door hinge extension. Roof top spot lights. Rear drawers. 2" lift. NADS. EGT and boost gauges. Trans temp and water temp gauges. Provent 200 catch can. Rear ladder
And crawling on the planet's face, some insects called the human race. Lost in time. And lost in space... and meaning.
-
The Following User Says Thank You to 4bye4 For This Useful Post:
afatboy (14th December 2014)
-
15th December 2014, 01:26 AM
#7
Patrol God
Gee mate that's not good news, sounds like the gasket but as 4bye says skim the head and crack test it.
2003 gu3 td42tdi sold 😞 bloody gvm towing crap. Bt50 3500kg gvm.
-
-
15th December 2014, 09:20 AM
#8
Patrol Guru
Do you have a water cooled turbo? Not sure what engine your running, but could it be possible that a seal has gone in the turbo and coolant is simply going out the back of the turbo down the dump and out?
-
-
15th December 2014, 02:15 PM
#9
Dribble Master
Originally Posted by
sooty_10
Do you have a water cooled turbo? Not sure what engine your running, but could it be possible that a seal has gone in the turbo and coolant is simply going out the back of the turbo down the dump and out?
Nah mate, it's a tb42, can't remember if he's running gas as well though
-
-
19th December 2014, 02:30 AM
#10
Advanced
So a quick update. Head has a crack over an inch long in number 5 pot. Chosen to go brand new head. Early Christmas present for me, I guess.
-
The Following User Says Thank You to afatboy For This Useful Post:
Stropp (19th December 2014)