Welcome to the Nissan Patrol forum. To post a question and to see less adds on the forum then you will have to register
first. We are an easy going friendly forum so join in the conversations and feel free to ask any questions.
Become a forum sponsor for only $20 and see no adds with faster page loading times and many extras benefits.
Hi all
I'm a newby to this forum and can't download a manual yet and have run into a problem.
My right hand side brake light isn't working and I have undone the two screws and pulled it apart. I can get to the globe to replace it but have found 4 clips and don't know where they go for re installation. Where do these clips go ?ny help would be great and a photo from a manual would be awesome. Thanks in advance !!
Hi Simon, best to take a photo of what you mean bud. You will get an answer much quicker I reckon.
Also I take it, it's the rear quarter light, not the lower bumper light.
I can see the clips. Now the plastic surround the houses the tail light has four tags on it. These tags slips through a little slot on the bumper itself and then these clips go on the inside of the bumper and slide onto the tag. A lot of Patrols don't have them as they simply fall off. Mine have never been there and I have two springs, like an accelerator return spring, that holds the lights in place.
Thank you very much mudski I have realised what I have to do now. The plastic surround was loose on the top and now I can replace it with clips to hold in place. Once again thanks
Thank you very much mudski I have realised what I have to do now. The plastic surround was loose on the top and now I can replace it with clips to hold in place. Once again thanks
Too easy mate. Does your light have the two springs behind there too?
No worries. I think because I don't have those clips, I have these springs instead. Makes it easier when removing the lights though. Just unclip the spring 8 either end and the light falls out.