rear draws from 4wd action

[besp]

Thanks katwoman ans mudski.
We're probably getting a 65l waeco. Taller than both of yours and side hinge rather than end hinge on the arb so I have a feeling this might be an issue.
I'll have to have a really good measure up but I may have to reconsider building my own.

[BigRAWesty]

One thing I've noticed with these steel draws (in general) is they all seem to be really catious about extended weight on the draws..
My outback draws have about a 300mm over lap on the draw when fully extended..
That's a crazy huge amount..
I'm going to pull mine out and mod it so it has a 100mm overlap and you can actually get stuff out from the back of the draws..
I'll assume the fridge slide top is the same but not sure how easy that is to mod..

[mudski]

I stood in my drawers fully open...

Sent from my GT-N7105T using Tapatalk

[rusty_nail]

I stood in my drawers fully open...

Sent from my GT-N7105T using Tapatalk

yeah but look at the size of you mate! haha, i dont know if the drawers would support the weight of our more "sturdily built" members hahaha

[threedogs]

Little bird told me that TJM will soon have a drawer system of their own.
About time, I say lol
There must be a way to make a drop down that doesn't cost the earth

[mudski]

If it can hold me it can hold anything you put in them.

Sent from my GT-N7105T using Tapatalk

[threedogs]

Thanks katwoman ans mudski.
We're probably getting a 65l waeco. Taller than both of yours and side hinge rather than end hinge on the arb so I have a feeling this might be an issue.
I'll have to have a really good measure up but I may have to reconsider building my own.

PM sent ,if you do build your own,,,,,, cage the fridge in so you can pack gear on top as well.
You can buy fridge cages, Ill see if I can find a link
I think these are a great idea,,,,
http://www.ebay.com.au/itm/Steel-Fri...item20f4f9fc37
Im sure you could buy a sheet of mesh and do the same thing for a lot cheaper

[Hodge]

PM sent ,if you do build your own,,,,,, cage the fridge in so you can pack gear on top as well.
You can buy fridge cages, Ill see if I can find a link
I think these are a great idea,,,,
http://www.ebay.com.au/itm/Steel-Fri...item20f4f9fc37
Im sure you could buy a sheet of mesh and do the same thing for a lot cheaper

When you find one let me know.
Might replace my solid mdf fridge surround with cage / mesh setup for ventilation reasons...
Attachment 64866

Tapatalked from S6

[threedogs]

When you find one let me know.
Might replace my solid mdf fridge surround with cage / mesh setup for ventilation reasons...
Attachment 64866

Tapatalked from S6

Mate I'd go to Robot buy a sheet of mesh and go from there, might only cost $60 for a large sheet.
enough to make some covers for the cargo area windows as well ,protect you tint a bit.
You can buy special clips to hold it all together or just tack weld in a few places.

[Winnie]

MSA make cages. Very expensive though