Y61 td42

[Jorjina Paul]

Hi guys. What are the torque specs for Y61 TD42 cylinder head? And the valve clearance.. inlet and exhaust. Please help me guys. Many thanks. Tomboy.

[Sharky1]

Torque is in 2 stages. Stage 1= 39-44Nm. Stage 2= 59-64Nm.
Inlet valve clearances are both same & are 0.030-0.040mm (warm engine)

[Jorjina Paul]

Thanks heaps. what if the engine is cold? will try that and advise. thanks again.

Torque is in 2 stages. Stage 1= 39-44Nm. Stage 2= 59-64Nm.
Inlet valve clearances are both same & are 0.030-0.040mm (warm engine)

[nissannewby]

Torque is in 2 stages. Stage 1= 39-44Nm. Stage 2= 59-64Nm.
Inlet valve clearances are both same & are 0.030-0.040mm (warm engine)

Your torque specs are wrong mate.

There are 3 different sequences depending on which td42 you have.

TD42

1- 49-59nm
2- 98-108nm

TD42T

1- 39-44nm
2- 59-64nm
3- +110 degrees

TD42Ti

1- 40-44nm
2- 59-63nm
3- +100-120 degrees.