Fitting bonnet scoop

[trolla]

Hey guys just wondering if anyone has fitted an intercooler scoop to the gq bonnet. I was supplied a gu scoop with the intercooler kit but it doesn't fit the contours of my bonnet as gu bonnets are pretty much flat. If anyone has fitted one of these or another scoop or has an info that could help I would appreciate it. Thanks

[threedogs]

Hi mate and welcome to the forum , can you pop over to the intros and tell us a bit about yourself and your Patrol
just something the forum asks of us all polite and all.
You'll get a better response too.
Winnie and Mudrunner have to wide scoop on their GQ's from memory

[Bloodyaussie]

As 3dogs mentioned head over and say gday as for scoops.... I need one... anyone got one hanging about not doing anything?

[AB]

The contour of the gq is quite flat too, they don't mount in the centre though where the indent is.

Never done it myself but should be straight forward. Cut and prime and the scoop bolts from underneath.

Interested to hear from someone who has done it for any pointers??,

[threedogs]

doesn't it need a spacer to fill the void from the bonnet contour?

[AB]

doesn't it need a spacer to fill the void from the bonnet contour?

I've seen a lot of people offset the gu ones or even double up each side.

You would need to do something of course if you wanted it centred.

[Bloodyaussie]

Anyone have a stock one they dont want??????

[AB]

Anyone have a stock one they dont want??????

You can get new moulds on eBay for about $80 mate.

[Bloodyaussie]

You can get new moulds on eBay for about $80 mate.

I want someone to say " Here mate just have this for free".... ?

[MEGOMONSTER]

Anyone have a stock one they dont want??????

I will have one spare when I upgrade my intercooler and scoop, and I'm more than happy to pass it over to you.
I'll even give you a discount.
bwahahahahahahahahahaha