-
24th September 2014, 08:13 PM
#11
Rotaredom
Originally Posted by
Smoothrun
Ive looked on their site today and only seen 60kg and 225kg slides, 60kg right on the boarder for me and 225kg will hold pigs up. im hopin for more like 100kg, ill check em out tomorrow
thanks
They still do the 100kg
http://uesint.com/shop/industrial-dr...kg-420-76-362/
I wish I grabbed some from work before I left the mob that i worked for, could of done my own draws
Let me know how much you can get them for if u decide 2 go the UES ones and I'll see if I can get a better price
Time is never wasted when your wasted all the time
WARNING: Towballs used for recoveries can, and do kill people and damage property.
-
The Following User Says Thank You to NissanGQ4.2 For This Useful Post:
Smoothrun (24th September 2014)
-
24th September 2014 08:13 PM
# ADS
Circuit advertisement
-
24th September 2014, 08:58 PM
#12
Expert
From memory I got the 125kg 1000mm extension slides, they were roughly $80 a pair. I got two pairs of locking ones, but if I did it again I would get one pair of locking and one pair normal then swap one side so each drawer had only one locking slide. Only having to activate one little latch per drawer would make opening and closing much easier but you would still be able to lock the drawer in and out which is very very handy.
GQ highmount, lockers, barwork, 3-Link front, long arms, V8, cage, duct tape, cable ties and 35's
-
-
24th September 2014, 09:41 PM
#13
Expert
Thanks for the offer NGQ4.2, Ill head into Dandy tomorrow and get back to ya,
If ya hadda grabbed a pallet before ya left the mob ya coulda bought yaself some black widow drawers lol
Cheers
-
The Following User Says Thank You to Smoothrun For This Useful Post:
NissanGQ4.2 (24th September 2014)
-
12th January 2016, 05:28 PM
#14
How about smaller drawers? am filling up some of the space beside my fridge with smaller ones. don't think that i need bearings etc...thoughts?
-
-
13th January 2016, 07:33 AM
#15
Patrol God
I use UHMW (tough as nails nylon) strip for my full size draws..
Easily 40 kilo in the recovery draw and it slides very well..
I like timber and nylon as you loose stuff all room between the draws..
Just search westy's draw build for the thread
-