-
20th September 2014, 08:16 AM
#11
Patrol God
Originally Posted by
mudnut
Keep the old one, Kallen. It may only be a couple of components that are shot.
From what I can see the main coil contact running along the board is stuffed..
There is some corrosion on it also but unsure of the extent.
I can clean it down, what woukd be best?
-
-
20th September 2014 08:16 AM
# ADS
Circuit advertisement
-
20th September 2014, 01:24 PM
#12
Patrol God
contact cleaner in a spray can from auto shop mate works wonders
2003 gu3 td42tdi sold 😞 bloody gvm towing crap. Bt50 3500kg gvm.
-
-
20th September 2014, 02:26 PM
#13
Patrol God
It may come good with the cleaner, but moisture penetrates some components and any joints with dissimilar metals corrode. It may do good to clean the space between any circuits on the board, to make sure there is no tracking between them. Maybe redo any moisture affected the solder joints. Most of the components are cheap, but if the relays are stuffed, then that's where the big money is.
Last edited by mudnut; 20th September 2014 at 02:39 PM.
My advice is: not to follow my advice.
-
-
20th September 2014, 02:32 PM
#14
Dribble Master
Hit it with a big hammer, that'll did it
-
The Following User Says Thank You to Clunk For This Useful Post:
BigRAWesty (20th September 2014)
-
20th September 2014, 04:30 PM
#15
Patrol God
Ok. Will try source the farked part.. But have just noticed this..
Looks burnt..
ForumRunner_20140920_152913.png
And what is this called??
ForumRunner_20140920_153006.png
-
-
20th September 2014, 05:41 PM
#16
Patrol God
The first one looks like a choke, the second is a relay. I think the wreckers are the go. The moisture has done its worst, Kallen. Just out of curiosity, What part number is that chip? I have kept a few over the years, so I may have one in the shed.
Last edited by mudnut; 20th September 2014 at 05:47 PM.
My advice is: not to follow my advice.
-
-
20th September 2014, 06:26 PM
#17
Patrol God
https://www.youtube.com/watch?v=UWG6nd7HeBc
This module looks vey similar to yours, Kallen. You may be able to source a cheaper one for parts, or it may just work.
The number on the pc board is ET1571. Hope that helps.
Last edited by mudnut; 21st September 2014 at 12:27 AM.
My advice is: not to follow my advice.
-
-
21st September 2014, 07:11 AM
#18
Patrol God
Well I got creative yesterday arvo and fixed the coil..
Now this has me stumped.
I plugged it back in and both coils are working, but only on the drivers window. No windows are winding but the coils are working..
The rest of the board looks good, apart from that burnt wire, but if the coils are working does this mean it's ok??
-
-
21st September 2014, 07:20 AM
#19
Patrol God
Also thanks for the vid MN.. They are the same unit. That'll help broaden the serch
-
-
21st September 2014, 12:30 PM
#20
Patrol Guru
Interesting I'm gonna go have a look at mine. Does this control all the windows in the car?
2004 4.2TDi GU ST Ute, 3" Exhaust, UHF, Lightforce Spotties, BFG All Terrains, Steel Winchbar, Winch, Dual Batts, CC Ultimate IC, 4" Snorkel, XLR8 Steps and Scrub bar
-