-
16th September 2014, 09:39 AM
#1
Water in swivel hub
Greetings
I have a GQ patrol and I went through a deep water crossing. After removing one of the bolts when checking the swivel hub, water came out (only on one side). I have checked dif and there was no water entry there.
What should my next step be?
-
-
16th September 2014 09:39 AM
# ADS
Circuit advertisement
-
16th September 2014, 10:51 AM
#2
Patrol God
remove a FWH's both sides and see if any water has been sucked past the seals ,
hot diffs and cold water not a good combo
04 ST 3lt auto, not enough Mods to keep me happy, but getting there
-
The Following User Says Thank You to threedogs For This Useful Post:
angelo_f (16th September 2014)
-
16th September 2014, 07:54 PM
#3
Patrol God
Mudrunner's thread will help you heaps. I used a fine wet'n'dry on the axle housing so the seals don't get chewed out again.
http://www.nissanpatrol.com.au/forum...highlight=hubs
My advice is: not to follow my advice.
-