My DIY fitting of a Runva EWX1200 winch to a Nissan Patrol Genuine Bullbar

[harrythomas]

No mate keep it very simple cut the blue wire that runs to the power battery cable (middle large terminal )and spliced in 3mm twin core pair and ran back to switch in cab .Its only to break the circuit at the controller on the box on the front .If you use the remote and have the box isolated you will have full function through the remote . Tried to upload 3 pics but cant get it too happen tried AB's directions still no luck and not enough patience.

RUNVA 11000

IMG_0029.JPG[ATTACH=CONFIG]47958[/ATTACHIMG_0032.JPG]IMG_0031.JPG

Sorry its so messy but 2 photos show the original wire layout and 2 show the red and black spliced in to go too cab switch .If a Mod has time feel free to tidy up .

Thanks for putting your time in to get those photos loaded dads tractor. I sure they will be a great help when I get back to it finishing the final bits and pieces.

Harry.