-
6th July 2014, 10:45 AM
#11
Originally Posted by
FNQGU
I'm assuming you are going to cover the drawers in carpet or something?
If I could do mine again, I'd opt for a removable liner in the drawer to make it easier when cleaning it all out after a big trip or someone has spilled the bloody sugar or something...
LOL .. .I'm not a very sweet person so it wouldn't be sugar but great idea. Have to snoop around a bit used to be a white plastic board used in marine applications as that comes in various thickness, as small as 4mm if I remember correctly. One might be able to come up with something or just some clear vinyl?
Yes, picked up some marine black and grey carpet at the local Dunnings that I will put on the top/front and until suggested was going to glue the black stuff to the inside of the drawers.
2004 4.2TD ST, Berrima Diesel Injector Tuned, Viper 3" SS exhaust, Cross Country Ultimate Intercooler, Solvaris sound proofing, DigOptions GPS/MMU, 220mm Roo Lights, PIONEER TS-D1602R 6.5" x 4 speakers, Autocar EGT&Boost gauges, Brown Davis 80L Aux, Icom 440, Alloy drawers and cargo barrier, 2" Amanda Extreme / Dobson / PolyAir lift, CSA mags with Toyo ATII tyres, Rhino Pioneer roof rack now with brackets, Performance 4x4 16g Large.
-
-
6th July 2014 10:45 AM
# ADS
Circuit advertisement
-
9th July 2014, 11:09 PM
#12
'Think you used enough LED's there Butch?'
wow... don't think I need that wattage .. but they are there to stay .
General 007.JPGGeneral 008.JPG
2004 4.2TD ST, Berrima Diesel Injector Tuned, Viper 3" SS exhaust, Cross Country Ultimate Intercooler, Solvaris sound proofing, DigOptions GPS/MMU, 220mm Roo Lights, PIONEER TS-D1602R 6.5" x 4 speakers, Autocar EGT&Boost gauges, Brown Davis 80L Aux, Icom 440, Alloy drawers and cargo barrier, 2" Amanda Extreme / Dobson / PolyAir lift, CSA mags with Toyo ATII tyres, Rhino Pioneer roof rack now with brackets, Performance 4x4 16g Large.
-
The Following User Says Thank You to HuskyInAuz For This Useful Post:
-
22nd July 2014, 11:15 PM
#13
Jumping ahead a fair bit.
Fitted the drawers in the back using those unused jump seat fittings.
Carpeted the drawers and have the edging to dress it up a bit, don't know if that will be done before we leave, you can also see the 2/3 cargo barrier installed.The Intelliquip storage box arrived, pretty good unit, don't like the shipping so as we pass through Brisbane I'm going to stop and get a couple more and will pay for the fuel to get there.
Camper.Patrol 005.jpg
A view of the ally barrier, this side will not be carpeted (more why in a few moments)
Camper.Patrol 007.jpg
Made some brackets to support the top of the cargo barrier using the PAS seat belt anchor
Camper.Patrol 006.jpg
Now... why there is no carpet
DOG HAIR doesn't cling to bare AL'y !!
Dogs will enter via passenger side, one get the high road, the other the third class cabin. I have to carpet the stand tomorrow and pack more crap in below it.
Camper.Patrol 013.jpg
Camper.Patrol 014.jpg
2004 4.2TD ST, Berrima Diesel Injector Tuned, Viper 3" SS exhaust, Cross Country Ultimate Intercooler, Solvaris sound proofing, DigOptions GPS/MMU, 220mm Roo Lights, PIONEER TS-D1602R 6.5" x 4 speakers, Autocar EGT&Boost gauges, Brown Davis 80L Aux, Icom 440, Alloy drawers and cargo barrier, 2" Amanda Extreme / Dobson / PolyAir lift, CSA mags with Toyo ATII tyres, Rhino Pioneer roof rack now with brackets, Performance 4x4 16g Large.
-
-
13th June 2015, 01:20 PM
#14
Great job, are you still happy with it? What improvement, if any. would you make?
-
-
13th June 2015, 10:38 PM
#15
Yes still happy. Probably didn't need the whole 5M of LED lights.
Would make one more drawer for left side as wife has taken up the drawers as pantry now for our 3 month trip leaving the tools and recovery gear on the back of the CT
2004 4.2TD ST, Berrima Diesel Injector Tuned, Viper 3" SS exhaust, Cross Country Ultimate Intercooler, Solvaris sound proofing, DigOptions GPS/MMU, 220mm Roo Lights, PIONEER TS-D1602R 6.5" x 4 speakers, Autocar EGT&Boost gauges, Brown Davis 80L Aux, Icom 440, Alloy drawers and cargo barrier, 2" Amanda Extreme / Dobson / PolyAir lift, CSA mags with Toyo ATII tyres, Rhino Pioneer roof rack now with brackets, Performance 4x4 16g Large.
-
-
15th June 2015, 03:12 PM
#16
Patrol Guru
great job mate. good idea with the lights in them
-
-
15th June 2015, 04:37 PM
#17
Patrol Freak
Originally Posted by
HuskyInAuz
wow... don't think I need that wattage .. but they are there to stay . <img src="http://www.nissanpatrol.com.au/forums/attachment.php?attachmentid=46742"/><img src="http://www.nissanpatrol.com.au/forums/attachment.php?attachmentid=46743"/>
Just wondering how well are the LED'S going to shine in the draw when the draw is open?
-