OUR VIDEOS GALLERY MEMBER SPONSORSHIP VENDOR SPONSORSHIP

User Tag List

Page 1 of 2 12 LastLast
Results 1 to 10 of 12

Thread: *urgent* No low beam

  1. #1
    Beginner skits's Avatar
    Join Date
    May 2014
    Location
    Kalgoorlie
    Posts
    11
    Thanks
    0
    Thanked 0 Times in 0 Posts
    Mentioned
    0 Post(s)
    Tagged
    0 Thread(s)

    Exclamation *urgent* No low beam

    I urgently need some help. I have no low beam on my GU Patrol. High beam works fine. All fuses are fine.
    I should listen to my wife

  2. # ADS
    Circuit advertisement
    Join Date
    Always
    Location
    Advertising world
    Posts
    Many

     

  3. #2
    Legendary NP99's Avatar
    Join Date
    Feb 2013
    Location
    Broadford VIC
    Posts
    4,039
    Thanks
    1,142
    Thanked 2,210 Times in 1,286 Posts
    Mentioned
    0 Post(s)
    Tagged
    0 Thread(s)
    Does the high beam light show on the dash when on low beam? Shake and wiggle the connectors behind the lights. This fixed my problem.
    1999 GU 4500 dual fuel

    Il dado è tratto

  4. #3
    Beginner skits's Avatar
    Join Date
    May 2014
    Location
    Kalgoorlie
    Posts
    11
    Thanks
    0
    Thanked 0 Times in 0 Posts
    Mentioned
    0 Post(s)
    Tagged
    0 Thread(s)
    na no high beam light only if high beam is on. Pulled globes out and they are both fine. they worked fine on the way home from work this morning.
    I should listen to my wife

  5. #4
    Advanced thebrod's Avatar
    Join Date
    Sep 2013
    Posts
    66
    Thanks
    14
    Thanked 21 Times in 15 Posts
    Mentioned
    0 Post(s)
    Tagged
    0 Thread(s)
    hmmm could be a relay issue......

  6. #5
    Apprentices Rule!!! Punderhead's Avatar
    Join Date
    Nov 2011
    Location
    Toowoomba, QLD
    Posts
    1,623
    Thanks
    238
    Thanked 916 Times in 431 Posts
    Mentioned
    2 Post(s)
    Tagged
    0 Thread(s)
    Possibly an issue in the switch itself. I had a similar issue in mine, and a mate had the same in his. Pull the switch off, check the contacts for any blackness, and clean dirty contacts with a bit of fine sandpaper and some contact cleaner. Reassemble and see what happens.

    Cheers
    GO HARD OR GO HOME!!!
    My rig HERE http://www.nissanpatrol.com.au/forum...Moneypit-89-GQ
    WARNING: Towballs used in a recovery can and DO KILL people!!!

  7. #6
    Expert clubbyr8's Avatar
    Join Date
    May 2014
    Location
    Penrith, NSW
    Posts
    393
    Thanks
    187
    Thanked 684 Times in 172 Posts
    Mentioned
    3 Post(s)
    Tagged
    0 Thread(s)
    Quote Originally Posted by thebrod View Post
    hmmm could be a relay issue......
    There's no headlight relay in a GU patrol unless you have xenon lights, at least not in my 2010 GU VII.
    GROOVY GUVII

    2" Toughdog Lift, Ctek D250S, 152AH AGM Battery, Homemade Battery Box, Duel Rear Cameras, GME TX3510W UHF, Alloy Roof Rack, Kings 2.5m Awning, Titan Drawers.

  8. #7
    Legendary happygu's Avatar
    Join Date
    Aug 2012
    Location
    Melbourne
    Posts
    3,019
    Thanks
    122
    Thanked 1,037 Times in 846 Posts
    Mentioned
    2 Post(s)
    Tagged
    0 Thread(s)
    Most likely culprit will be the switch, as it gets turned on and off a lot over a lifetime.

    Check for 12V at the globes when you turn on the low beams, and if no voltage, then check the wiring out of the switch
    GU PATROL 2011 Ti, with goodies...

  9. #8
    Beginner skits's Avatar
    Join Date
    May 2014
    Location
    Kalgoorlie
    Posts
    11
    Thanks
    0
    Thanked 0 Times in 0 Posts
    Mentioned
    0 Post(s)
    Tagged
    0 Thread(s)
    we checked the relay box but there isnt any relays for the headlights, might have to check the switch out tomorrow, thanks guys.
    I should listen to my wife

  10. #9
    Advanced
    Join Date
    Oct 2013
    Location
    Port Hedland
    Posts
    40
    Thanks
    2
    Thanked 6 Times in 2 Posts
    Mentioned
    0 Post(s)
    Tagged
    0 Thread(s)
    Sounds like a loose wire if its not the switch. Have you been working under the hood?

  11. #10
    Beginner skits's Avatar
    Join Date
    May 2014
    Location
    Kalgoorlie
    Posts
    11
    Thanks
    0
    Thanked 0 Times in 0 Posts
    Mentioned
    0 Post(s)
    Tagged
    0 Thread(s)
    no i havnt been working under the hood for a couple weeks. ill check the switch out and check voltage at the globes next,
    I should listen to my wife

Page 1 of 2 12 LastLast

Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •