-
30th January 2017, 11:15 PM
#351
Originally Posted by
jay see
Got a link?
http://www.clearviewmirrors.com.au/
A fair whack dearer than the MSA one though.
Sent from my GT-N7105T using Tapatalk
-
-
30th January 2017 11:15 PM
# ADS
Circuit advertisement
-
30th January 2017, 11:24 PM
#352
Legendary
Originally Posted by
mudski
Don't really see much of a difference.
12/97 GEE YOU
4.5lt Gas blower. Lots of mods to come.....all in good time.
-
-
30th January 2017, 11:41 PM
#353
Legendary
Originally Posted by
mudski
You make a strap for the middle too John?
Nah, I didn't.
12/97 GEE YOU
4.5lt Gas blower. Lots of mods to come.....all in good time.
-
-
31st January 2017, 08:23 AM
#354
Patrol Freak
Originally Posted by
jay see
Don't really see much of a difference.
Pretty sure unleashed (or whateva pat callans mag is called) did a review comparison of the msa and clearview drop down slides last year.
From memory they're pretty similar, think the clearview has a few other new features and weighs a fair bit less as well - but it does cost a few hundred $$$ more
Sent from my iPhone using Tapatalk
2008 GU6 3.0 CRD AUTO | Safari Snorkel | 2" Ironman lift kit | Runva 11XP Winch | 33" MTZ's | Full Length Roof Rack | GME TX3200 | 30" LED Light Bar |
-
The Following User Says Thank You to Bacho86 For This Useful Post:
jay see (31st January 2017)
-
31st January 2017, 08:34 AM
#355
Originally Posted by
jay see
Nah, I didn't.
You might find the centre of the drawers will pull up when the drop slide is loaded and pulled out.
Originally Posted by
jay see
Don't really see much of a difference.
The MSA slide handle lifts up and over the fridge when you lower it. The Clearview fridge goes down. Not a big deal for most but for a shorty like me, and if your parked on a bit of a hill, it can be a task. Also I have found the handle hits the top section of the small barn door too when lowering. So I need to force the door open that little bit more for it to clear.
-
-
31st January 2017, 10:21 AM
#356
Legendary
Originally Posted by
mudski
You might find the centre of the drawers will pull up when the drop slide is loaded and pulled out.
The MSA slide handle lifts up and over the fridge when you lower it. The Clearview fridge goes down. Not a big deal for most but for a shorty like me, and if your parked on a bit of a hill, it can be a task. Also I have found the handle hits the top section of the small barn door too when lowering. So I need to force the door open that little bit more for it to clear.
I'm going to put it all in today and then see how it holds up. If a center point is needed will do it then.
I think you might be taller than me lol.
I reakon i can live with the MSA considering the the whole set up (draws, dropslide, cage and fridge) cost me $1600.
Last edited by jay see; 31st January 2017 at 10:23 AM.
12/97 GEE YOU
4.5lt Gas blower. Lots of mods to come.....all in good time.
-
The Following User Says Thank You to jay see For This Useful Post:
mudski (31st January 2017)
-
31st January 2017, 04:03 PM
#357
Legendary
12/97 GEE YOU
4.5lt Gas blower. Lots of mods to come.....all in good time.
-
-
1st February 2017, 08:11 AM
#358
Legendary
Should I be running all negatives to a buzz bar or just earth them to the closest point.
12/97 GEE YOU
4.5lt Gas blower. Lots of mods to come.....all in good time.
-
-
1st February 2017, 10:55 AM
#359
Depends on what it is I suppose. I try to have a common earth point in different sections of the car. Only for trouble shooting if need be really.
-
The Following User Says Thank You to mudski For This Useful Post:
jay see (1st February 2017)
-
1st February 2017, 11:22 AM
#360
Legendary
Winch switch sorted. Just need to do a simple switch on the bar and some light for the isolator.
12/97 GEE YOU
4.5lt Gas blower. Lots of mods to come.....all in good time.
-
The Following 4 Users Say Thank You to jay see For This Useful Post:
Family4x4 (1st February 2017), MB (19th February 2017), Mike02Ti (1st February 2017), Rossco (1st February 2017)