Jay see 1997 GU build up

[MudRunnerTD]

That's a knot yeah?

I was going to use hammer lock. I've got the same hook bug rated 3.2.

Sent from my CPH1979 using Tapatalk

Hi mate, if you are going to but that rope lock the cut that tab off and seal the end with some heat shrink so it doesn't frey. If you splice in a loop to the other end for your hook all you do is put the loop through the hook hole the the other end through the loop. Lasso. That way there is No metal thimble to wreck your washing machine either.

[MudRunnerTD]

Here are photos of mine. I did the splice loop ans fitted the sheath to the loop.







Sent from my SM-G977B using Tapatalk

[jay see]

The rope has a loop on the hook end already.

Is will work??

Sent from my CPH1979 using Tapatalk

[Rossco]

Yeah that'll work good. Best to minimize the hardware if ya don't need it. Have a hook and rope on work car and just snitched like that. .

Sent from my SM-G930F using Tapatalk

[MudRunnerTD]

The rope has a loop on the hook end already.

Is will work??

Sent from my CPH1979 using Tapatalk

Yeah mate, when that is pulled tight it will be identical to my pics. Perfect.

[MB]

Rocking & Rolling Now Jaysee Mate!
You’ve got your new welder, have a crack at a four sided tacking of an 8mm x 30mm rod or a half 8mm cut chain link in the corner of your winch spool?
Daz can guide you through a decent monkey fist type knot or double granny half arse it like me :-)
Sometimes we desperately need those extra few rotations beyond 8 maybe to say 3 overlapping hitched after a fixed mechanical knot?


Sent from my iPhone using Tapatalk

[jay see]

Rocking & Rolling Now Jaysee Mate!
You’ve got your new welder, have a crack at a four sided tacking of an 8mm x 30mm rod or a half 8mm cut chain link in the corner of your winch spool?
Daz can guide you through a decent monkey fist type knot or double granny half arse it like me :-)
Sometimes we desperately need those extra few rotations beyond 8 maybe to say 3 overlapping hitched after a fixed mechanical knot?


Sent from my iPhone using Tapatalk

Nah, I reckon I'll go that little strap thingo, but I will have a couple flags on the rope one at 1st full wrap of the drum and another at 2nd.

Sent from my CPH1979 using Tapatalk

[MB]

Pinkies covered in mud, I’ve watched the 5<>10 minute strappy installation YouTubeys....Impossible :-)


Sent from my iPhone using Tapatalk

[jay see]

Redrill and tap might be the easiest way.
I'll worry about it when I get to it.

Sent from my CPH1979 using Tapatalk

[threedogs]

not a fan of those hooks only because that clip bends very easyly
other than hat if its rated and does the jod alls good