-
16th February 2018, 08:41 PM
#401
Legendary
It's in..
Need to make up a battery bracket to stop it from sliding left and right. Then repostiton the cables and fuse to neaten it up. I've also ordered a double Anderson to run off the battery, so will need to find a place for that.
Pretty happy with how it's come up. I always wanted to put the battery there.
Sent from my A1601 using Tapatalk
12/97 GEE YOU
4.5lt Gas blower. Lots of mods to come.....all in good time.
-
The Following 3 Users Say Thank You to jay see For This Useful Post:
AB (16th February 2018), Hodge (29th June 2018), rusty_nail (24th February 2018)
-
16th February 2018 08:41 PM
# ADS
Circuit advertisement
-
23rd February 2018, 04:06 PM
#402
Legendary
Progress report.
Battery is now completely secured. It sits on a 3mm plate that is screwed into the draws frame. Strapped over the center and held down it's a custom made battery clamp to stop it moving left to right.
Draw got welded today and is back in. Double Anderson and genuine weaco plug fitted. Will have to move the fuse box to the cage as well, them will fit everything to a board and neaten it up with some conduit.
Sent from my A1601 using Tapatalk
12/97 GEE YOU
4.5lt Gas blower. Lots of mods to come.....all in good time.
-
The Following 2 Users Say Thank You to jay see For This Useful Post:
mudnut (23rd February 2018), PeeBee (23rd February 2018)
-
23rd February 2018, 04:41 PM
#403
Legendary
Question.
The double Anderson is for the fridge and solar. There's a 10a fuse for the fridge wired on close to the plug, but do I need a fuse for the solar, or having a regular does the same thing??
Sent from my A1601 using Tapatalk
12/97 GEE YOU
4.5lt Gas blower. Lots of mods to come.....all in good time.
-
-
24th March 2018, 01:44 PM
#404
Legendary
One down one to go.
Dual oil and temp next.
Sent from my A1601 using Tapatalk
12/97 GEE YOU
4.5lt Gas blower. Lots of mods to come.....all in good time.
-
The Following 2 Users Say Thank You to jay see For This Useful Post:
MB (26th April 2018), mudski (24th March 2018)
-
24th March 2018, 02:14 PM
#405
Those Redarc Gauges are good hey. I have the same in mine.
-
The Following User Says Thank You to mudski For This Useful Post:
jay see (24th March 2018)
-
24th March 2018, 03:59 PM
#406
Legendary
Originally Posted by
mudski
Those Redarc Gauges are good hey. I have the same in mine.
Yeah they are, but not bloody cheap that why the other is still to come.
Sent from my A1601 using Tapatalk
12/97 GEE YOU
4.5lt Gas blower. Lots of mods to come.....all in good time.
-
-
24th March 2018, 08:15 PM
#407
Patrol God
Coming along nicely there.
-
The Following User Says Thank You to nissannewby For This Useful Post:
jay see (24th March 2018)
-
24th March 2018, 09:24 PM
#408
Legendary
Originally Posted by
nissannewby
Coming along nicely there.
Cheers mate.
Slowly but surely getting there.
Sent from my A1601 using Tapatalk
12/97 GEE YOU
4.5lt Gas blower. Lots of mods to come.....all in good time.
-
-
25th April 2018, 05:25 PM
#409
Legendary
Finally got around to running new wire from the rear fuse box to under the dash.
Pulled out the seats and pulled back the carpet. After a little sponge bath to the floor I ran a 7 core trailer and new wires to behind the centre console. Now it's all one piece no more joins.
Sent from my A1601 using Tapatalk
Last edited by jay see; 25th April 2018 at 07:40 PM.
12/97 GEE YOU
4.5lt Gas blower. Lots of mods to come.....all in good time.
-
The Following User Says Thank You to jay see For This Useful Post:
-
26th April 2018, 02:02 PM
#410
Patrol God
Can see some Dyna matt coming up, like Matt said its getting there buddy well done
big pat on your back mate, well done
04 ST 3lt auto, not enough Mods to keep me happy, but getting there
-