Quote Originally Posted by sooty_10 View Post
John sorry haven't been much help. On Holidays and been out of phone reception camping..... I concur with ben-e-boys pic. The centre connector should be an earth connection. You can run the small earth wire on bottom of winch motor to any metal contact point anywhere or even run it to the middle solenoid connector then onto an earthing point from there, plenty of ways to skin that cat. The split in the power in/out in the diagram, as ben-e mentioned, is the in/out switch which you can mount in the dash somewhere for in-cab controls. I used a momentary double pole double throw (DPDT) toggle switch for mine. To wire it to your existing controller plug you need to figure out which wire in the plug corresponds. Eg.

Sent from my SM-G925I using Tapatalk
No apologies mate.
Holidays and camping lucky bugger.

I'll sort it out, one way or another.

Thanks for the info, will take it onboard.