OUR VIDEOS GALLERY MEMBER SPONSORSHIP VENDOR SPONSORSHIP

User Tag List

Page 1 of 3 123 LastLast
Results 1 to 10 of 22

Thread: GU Patrol Barn Door crack repair guide

  1. #1
    The master farter
    mudski's Avatar
    Join Date
    Apr 2012
    Location
    Eltham North
    Posts
    15,597
    Thanks
    8,667
    Thanked 11,260 Times in 6,426 Posts
    Mentioned
    460 Post(s)
    Tagged
    1 Thread(s)

    GU Patrol Barn Door crack repair guide

    O.k So I have had a crack in my right barn door since owning the car. For those who don't know, the crack is caused by hanging a larger than stock tyre from the door bracket. The heavy tyre tries to pull the door outwards, hence, the window frame flexes just above where the frame meets the door skin and eventually cracks. Mine was cracked around half way through and hadn't moved, until I hung a 35 off it and it instantly cracked further. So something had to be done. Upon removing the inside door trim I had discovered that it was cracking on the inside too.
    20140523_203105 (Medium).jpg20140523_203111 (Medium).jpg

    I hunted around for a second hand door with no crack and the best I came up with was $400. No guarantees this door won't crack too...So I bought a Cigweld Gas/Gasless 130Amp mig welder for $350 and I will have this for other projects too...

    So gents here is how I went about repairing the crack. I am no expert welder and body repairer to I bloody hope it stays together.
    In a nutshell, I curved and slid up the inside of the door skin the RHS and plug welded it to the door...

    Tools you will need....
    • Mig welder
    • 25x25 RHS about 400mm long
    • 3mm x 25mm'ish flat steel about 800mm long
    • A Hydraulic press to bend the RHS or something else to do the bending
    • Drill and drill bits
    • Grinder and flappy disc to sand back the paint on the area to be repaired
    • Body filler
    • Spray putty / Primer
    • Paint
    • Plenty of time and patience
    • Welding skills, which I don't have
    • Body repair skills, which I didn't have either, Lol.

    Paint I used was just from SuperCheap. I gave them the paint code and they mixed up a spray can for me. I also got a can of clear for the final coat.
    20140528_093648 (Medium).jpg

    1. Removal of parts

    • Inner door trimmings
    • wiper arm and motor
    • top locking mechanism and control rod
    • door catch
    • door opening handle and mech.
    • all wiring going up to the top of the door

    2. Preparation

    I went roughly 200mm either side of the crack and measured and marked it out on the door. Then proceeded to drill 8mm holes down the door staying in the 400mm length, on both corner edges of the door as you will only be able to weld to two sides of the RHS.

    20140525_201830 (Medium).jpg

    3. Shaping the RHS

    This was quite tricky and took a while to get right. Luckily I have a cheap 12ton press I bought and its been money well spent i tell you. I used the press to bend and shape the RHS to the curve of the door.
    20140525_175401 (Medium).jpg

    To make the RHS nice and tight in the door I welded the flat steel to the side where I was to weld to basically pack it out. After I did that, I was fitting, removing, fitting and removing to still get the contours right. This take a few good hits with a hammer to slide it up the door skin, getting it out was not fun, I had to use a long bit of steel down from the top of the door where the top lock sits to punch it out... Grinding the edges off the flat to suit the contour of the RHS. Finnally the RHS was pretty close. Well good enough for me. Lol.

    20140526_135919 (Medium).jpg20140526_135911 (Medium).jpg

    This is what the RHS looks like up inside the door...
    20140526_163901 (Medium).jpg

    4. The welding begins.

    I forgot to take a pic of the finished welded door. Luckily I suppose as I as I ain't very good at welding. But all I did was slowly weld at the RHS and slowly filled the holes up with weld. Doing this slowly as I didn't want the door glass and rubber to get too hot. I had a wet rag with me and some water to pour over it just incase it got too hot. After a few welding sessions and then grinding sessions I thought it was good enough for me.
    20140526_154042 (Medium).jpg

    Remember to mask up the back door glass, as I forgot and it copped a little grinding spray and pitted a small section of the glass.

    5. Bog and sanding time.

    This is another area where I don't shine but I had nothing to lose really and wasn't too concerned as you can see this section with the door shut. So the bog was applied, I waited for it to dry and sanded it back until I was happy with the result.Like my bog skills?
    20140526_163840 (Medium).jpg
    One thing I found is I applied too much bog and didn't sand enough back. I had a though after I had painted it that there was too much bog over the cracked area and I knew the door would still flex a little. The end result was the bog cracked, so I just ran some white Sikaflex over it after the job was finished...

    I forgot again to take a pic of my final sanding job put here is a pic of the final spray putty before I painted it...I did four fine coats of spray putty with a light sand in between....
    20140527_150846 (Medium).jpg

    6. Final paint

    I did around six very light coats with the paint, also with a light sand in between using 800grit sand paper. I could have used finer but thats all I had...
    20140528_093710 (Medium).jpg

    Then four coats of clear to finish it off....

    20140528_132147 (Medium).jpg20140528_132140 (Medium).jpg

    Put all the hardware back in the door and then had beer!!!

    Hope this helps other out with their repairs...
    Last edited by mudski; 3rd June 2014 at 10:44 AM.

  2. The Following 18 Users Say Thank You to mudski For This Useful Post:

    4bye4 (22nd February 2015), Badball (21st February 2015), Bloodyaussie (3rd June 2014), Bulbous (2nd August 2014), gaddy (3rd June 2014), growler2058 (22nd February 2015), LaughingBeagles (16th May 2015), mudnut (3rd June 2014), my third 256 (28th June 2014), ova50 (3rd June 2014), Parksy (28th June 2014), Rocket55 (3rd June 2014), Rumcajs (3rd August 2014), Sir Roofy (3rd June 2014), SonOf (17th April 2015), Stropp (3rd June 2014), Timbo15 (27th June 2014), TimE (3rd June 2014)

  3. # ADS
    Circuit advertisement
    Join Date
    Always
    Location
    Advertising world
    Posts
    Many

     

  4. #2
    Hardcore 04OFF's Avatar
    Join Date
    Jan 2011
    Location
    Brisbane,QLD
    Posts
    2,574
    Thanks
    755
    Thanked 2,062 Times in 938 Posts
    Mentioned
    12 Post(s)
    Tagged
    0 Thread(s)
    Very nice job mate !


    Don't forget the paint or rustproofing on the "inside" where you worked.
    Last edited by 04OFF; 3rd June 2014 at 10:34 AM.
    <a href=http://i83.photobucket.com/albums/j320/02ard/PatrolcomAvatar-1-1.jpg target=_blank>http://i83.photobucket.com/albums/j3...Avatar-1-1.jpg</a>

  5. The Following User Says Thank You to 04OFF For This Useful Post:

    mudski (3rd June 2014)

  6. #3
    The master farter
    mudski's Avatar
    Join Date
    Apr 2012
    Location
    Eltham North
    Posts
    15,597
    Thanks
    8,667
    Thanked 11,260 Times in 6,426 Posts
    Mentioned
    460 Post(s)
    Tagged
    1 Thread(s)
    Quote Originally Posted by 04OFF View Post
    Very nice job mate !


    Don't forget the paint or rustproofing on the "inside" where you worked.
    I could only go as far as painting the back sides ( the unwelded sides) of the RHS as you have zero access in there once the RHS is in and welded up.

  7. #4
    Hardcore 04OFF's Avatar
    Join Date
    Jan 2011
    Location
    Brisbane,QLD
    Posts
    2,574
    Thanks
    755
    Thanked 2,062 Times in 938 Posts
    Mentioned
    12 Post(s)
    Tagged
    0 Thread(s)
    Im thinking, if you had perfectly good door, you could use Sikaflex to attach the extra support inside , may be enough to prevent the flex and so crack in the first place ?
    <a href=http://i83.photobucket.com/albums/j320/02ard/PatrolcomAvatar-1-1.jpg target=_blank>http://i83.photobucket.com/albums/j3...Avatar-1-1.jpg</a>

  8. #5
    The master farter
    mudski's Avatar
    Join Date
    Apr 2012
    Location
    Eltham North
    Posts
    15,597
    Thanks
    8,667
    Thanked 11,260 Times in 6,426 Posts
    Mentioned
    460 Post(s)
    Tagged
    1 Thread(s)
    Yes you definitely could I reckon. Or even drill into the inside of the window frame ( under the trimming) and screw it in. But the RHS needs to go in super tight so theres no movement. Or very little movement.

  9. #6
    Patrol God
    Join Date
    Mar 2012
    Location
    brisbane
    Posts
    4,934
    Thanks
    963
    Thanked 1,830 Times in 1,250 Posts
    Mentioned
    0 Post(s)
    Tagged
    0 Thread(s)
    Nice job mate that looks good! You could Spray some penetrol up in there with a straw fitting, it will make a flexible airtight film to prevent rusting, great for hard to reach areas I love the stuff.

    http://www.bunnings.com.au/flood-300...aycan_p1560172

  10. The Following 2 Users Say Thank You to megatexture For This Useful Post:

    mudski (4th June 2014), Parksy (28th June 2014)

  11. #7
    Beginner
    Join Date
    Jun 2013
    Posts
    2
    Thanks
    0
    Thanked 0 Times in 0 Posts
    Mentioned
    0 Post(s)
    Tagged
    0 Thread(s)
    Great post Mudski, I will be doing the same repair shortly. Do you believe that you have created enough strength for the door to carry a rim and 33" tyre, I'm going to try anyway but just thought I would get you opinion as I don't have the money to buy a wheel carrier and don't want the extra 100kg weight that comes with it either.

  12. #8
    Patrol God threedogs's Avatar
    Join Date
    Jun 2012
    Location
    Melb
    Posts
    31,636
    Thanks
    10,350
    Thanked 9,963 Times in 7,394 Posts
    Mentioned
    113 Post(s)
    Tagged
    2 Thread(s)
    A 33" and rim would weigh around 40kg I would think , you could do what Ive done and mount the spare internally
    Attached Images Attached Images
    04 ST 3lt auto, not enough Mods to keep me happy, but getting there

  13. #9
    The master farter
    mudski's Avatar
    Join Date
    Apr 2012
    Location
    Eltham North
    Posts
    15,597
    Thanks
    8,667
    Thanked 11,260 Times in 6,426 Posts
    Mentioned
    460 Post(s)
    Tagged
    1 Thread(s)
    Quote Originally Posted by brimon View Post
    Great post Mudski, I will be doing the same repair shortly. Do you believe that you have created enough strength for the door to carry a rim and 33" tyre, I'm going to try anyway but just thought I would get you opinion as I don't have the money to buy a wheel carrier and don't want the extra 100kg weight that comes with it either.
    Thanks....
    I have a 35inch on the door and it's holding great.

  14. #10
    Beginner
    Join Date
    May 2012
    Location
    Dysart Qld
    Posts
    3
    Thanks
    0
    Thanked 0 Times in 0 Posts
    Mentioned
    0 Post(s)
    Tagged
    0 Thread(s)
    did you disconnect the battery when welding? probably silly question

Page 1 of 3 123 LastLast

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •