Winch needed

[Covo71]

Thanks guys, I will go the 9500Q, seems to be the best bang for buck.

[MEGOMONSTER]

Thanks guys, I will go the 9500Q, seems to be the best bang for buck.

You need to ask will it be enough.
Almost 3 tonne of car ladened, stuck in the mud. ????????????
12000lbs.

[Covo71]

Hey mate, I was checking out the specs and the 9500q has a bigger motor in it. Not sure how that works. It is geared lower I am thinking but smaller motor. Doesn't make much sense to me.

[Bloodyaussie]

9500 is plenty mate....

[Rock Trol]

Hi Covo71,

The Runva EWX9500-Q should just fit into a standard Nissan steel winch bar.
I had mine installed by Pro4x4 in Adelaide a few weeks ago. Wasn't a lot of room between the motor and the chassis rail, but 2-3mm is all you need.

Now I just need to get out there and bog the car to test it out. Looks like a solid unit and of decent quality.
The warranty is the best around as well which is a bonus.

[Covo71]

Cheers mate, sounds good. Wait for the 15th

[nipagu7]

hi covo71 . the bigger motor with lower gearing makes it faster ( hence _competition winch ) . depending on you situation , faster might mean disaster . a slower winch like the xp11 or ewx1200 would be easier to control in difficult situations ,plus they are stronger 11mm rope instead of 10mm rope . just my 2cw .

[Family4x4]

So I am going to order a winch today, will the ruva 11xp be fine or get the 12xp?

[93patrol]

Either will be fine

[Patrol-Guy]

What is the Ironman 9500 like? Was thinking about one of them got a quote for one fitted for $1160.