-
15th May 2014, 03:00 PM
#1
My shorty
4317.JPG4318.JPG4319.JPGWell here goes my build Thread: I bought the GQ shorty off an old guy like me LOL about going on 3 years now, It was in standard condition never off roaded. He even didnt know that it had the factory sway bar disconnect . It had a TB42 petrol engine in it.
Last edited by Lightspeed; 15th May 2014 at 03:25 PM.
-
The Following 2 Users Say Thank You to Lightspeed For This Useful Post:
Family4x4 (15th May 2014), growler2058 (15th May 2014)
-
15th May 2014 03:00 PM
# ADS
Circuit advertisement
-
15th May 2014, 03:03 PM
#2
So then i made a few changes, to change it from a driving miss Daisey to a real 4x4.
-
-
15th May 2014, 03:12 PM
#3
-
The Following 2 Users Say Thank You to Lightspeed For This Useful Post:
Family4x4 (15th May 2014), growler2058 (15th May 2014)
-
15th May 2014, 03:14 PM
#4
This is what it looks like now.
-
-
15th May 2014, 03:20 PM
#5
-
The Following 2 Users Say Thank You to Lightspeed For This Useful Post:
Family4x4 (15th May 2014), growler2058 (15th May 2014)
-
15th May 2014, 03:40 PM
#6
Looks tops! Were you experimenting with your bonnet scoops and Intercooler there between photos?
I think someone might have graffiti'd on your spare wheel cover too...LOL!
Between Patrols ATM. Had a beaut GU with 6.5 Chev TD. Next is a GU ute with a 4.5 litre Cummins conversion and a camper on the back.
-
The Following User Says Thank You to FNQGU For This Useful Post:
growler2058 (15th May 2014)
-
15th May 2014, 04:04 PM
#7
Originally Posted by
BenK
Looks tops! Were you experimenting with your bonnet scoops and Intercooler there between photos?
I think someone might have graffiti'd on your spare wheel cover too...LOL!
Yea Bloody Kiwis LOL
-
-
15th May 2014, 04:31 PM
#8
The suspension was all standard so i added a EFS 2" lift with all superior engineering lower control arms, bent upper control arms, heavy duty adj panard rods & steering rods. Also a set of superior 2' radius arms.
Last edited by Lightspeed; 15th May 2014 at 04:44 PM.
-
-
15th May 2014, 05:15 PM
#9
-
The Following User Says Thank You to Lightspeed For This Useful Post:
growler2058 (15th May 2014)
-
15th May 2014, 05:25 PM
#10
-
The Following User Says Thank You to Lightspeed For This Useful Post:
Family4x4 (15th May 2014)