My DIY Drawers for my GQ Wgn

[Hendo70]

Hi Guys,
I recently finished my Rear Drawers for my ride, took a weekend to put together and cost me around $170 in materials.
I made a shelf at the rear left for my Inverter & room for the Fridge infront of it. The Drawers work really well, I used H/D Runners that attach to the side of the Drawer (cheaper)but I used a length Of Angle (alloy)to attach to them so they support the Base of the Drawer

[rusty_nail]

Hi Guys,
I recently finished my Rear Drawers for my ride, took a weekend to put together and cost me around $170 in materials.
I made a shelf at the rear left for my Inverter & room for the Fridge infront of it. The Drawers work really well, I used H/D Runners that attach to the side of the Drawer (cheaper)but I used a length Of Angle (alloy)to attach to them so they support the Base of the Drawer

AWESOME!! But

[healy]

Hi Guys,
I recently finished my Rear Drawers for my ride, took a weekend to put together and cost me around $170 in materials.
I made a shelf at the rear left for my Inverter & room for the Fridge infront of it. The Drawers work really well, I used H/D Runners that attach to the side of the Drawer (cheaper)but I used a length Of Angle (alloy)to attach to them so they support the Base of the Drawer

Wheres the picture?

[Hendo70]

sorry I did upload 8 pics but didnt come thru :/

[Hendo70]

2014-05-02 14.17.03.jpg2014-05-02 16.23.56.jpg2014-05-02 18.21.20.jpg2014-05-02 18.44.40.jpg2014-05-06 11.25.55.jpg2014-05-06 11.26.07.jpg

[Hendo70]

2014-04-30 17.14.10.jpg2014-04-30 17.14.46.jpg

I started out like this

[rusty_nail]

yeah i like it mate, really neat job. are the drawers on runners? or are they just sliding on timber?

[Hendo70]

on Runners mate, with Angle attached so they support the bottom of the Drawer too

[healy]

Looks good and better than spending a G on the sets companys are charging. Great work

[Hendo70]

Fitted the T-Handle Locks last night
2014-05-15 14.33.59.jpg2014-05-15 14.34.09.jpg