Need Help, Car wont start. When I pulled the bottom shroud off (to disconnect the ignition warning beeper) I noticed the plastic ring around the end of the ignition barrel was slightly broken. it has copper wire coiled around it and the wires were nearly touching the ignition barrel, I used a small screwdriver to put the exposed wires back in the plastic ring that runs around the barrel. then I disconnected the small brown plug which I think is the 'key in ignition' warning wire, tried starting the car and it just kept turning over. So I plugged brown plug back in and still car wont fire.?? The brown plug is the 'key in' wire as the beeping stops when I have it unplugged. Plugged or unplugged the car just turns over without firing. The red light on the dash still flashes when key is out so I guess I haven't tripped the immobiliser. Any ideas?? Have checked fuses and all ok.
3l 2011 st patrol wagon