Finally, I've got most of the the parts for a 2" lift, thank you very much to a gentleman named Jonathon. The rear springs on an ARB quote I had were the same, but I have noticed that the front springs have a different number (2975 Spring to 50 kg) to the one quoted for mine (2976 spring to 51 110kg). BA's Patrol is a TB42 with a steel bar and winch. Mine is only an RB30 with an alloy bar with a low mount winch with steel cable and approximately a 10 kilo (10mm steel) cradle. Will I have to get front springs that suit or will I be able to fit BA's donated springs without any problems? Also, I have been allowed to use a hoist to fit the lift, will I need to compress the springs to fit, or will they just slip straight in? Once again, thanks, BA. I love this place!!