Welcome to the Nissan Patrol forum. To post a question and to see less adds on the forum then you will have to register
first. We are an easy going friendly forum so join in the conversations and feel free to ask any questions.
Become a forum sponsor for only $20 and see no adds with faster page loading times and many extras benefits.
Ok small question..
I have 2 ports at the rear of the tank.
1/2" and 3/8 I think.
I have all the correct filler and breather ports at the top of the tank..
So???
Do you mean the ports are at the top of the rear part of the tank or the bottom of the tank?
So you can see supply and return on the sender unit,
And filler, quick fill breather and expansion breather.
Then 2 more left of pic, which are at the rear of the tank..
And yes, I'm missing a mount..
So you can see supply and return on the sender unit,
And filler, quick fill breather and expansion breather.
Then 2 more left of pic, which are at the rear of the tank..
And yes, I'm missing a mount..
No idea mate, I'm on the phone but there is another diagram on here ill try and find for you which may help solve this.
Also Westy being yours is probably the same as mine and out of a carby to be used as an aux tank on a dual neck filler you will need a reducer for the aux filler hose.
The aux tank will be 48mm, I can't remember what the neck will be but it will be smaller in diameter so you'll need a reducer.
Sorry for resurrecting old post, but what do you mean by overflow setup, I'm at that point now. Thanks
Im assuming if he's only using one filler bascially the aux tank gets filled once the main tank is full. I assume the main is connected direct to the aux and it basically overflows into the aux tank.