Welcome to the Nissan Patrol forum. To post a question and to see less adds on the forum then you will have to register
first. We are an easy going friendly forum so join in the conversations and feel free to ask any questions.
Become a forum sponsor for only $20 and see no adds with faster page loading times and many extras benefits.
Going to get some S/S trivets made 200 or 8" in diameter x about 2mm
will have three feet 10mm long, if anyone is interested give me a Pm or whatever
These will be better than whats out there in the market place, some are selling cake drying racks as trivets WTF
I'm making them as plain as possible to reduce cost, getting back to making gear again
Should fit nicely in a 9quart camp ovena
Last edited by threedogs; 12th March 2014 at 05:40 PM.
04 ST 3lt auto, not enough Mods to keep me happy, but getting there
still being cut they are plain ,,as the expense in in the gas for cutting it,,, so its basically an 8" plate with 3 legs
2mm thick from 304 stainless, should be easier to clean than those perforated jobs,
could even be cheaper again that's ball park it wont be any higher that's for sure.
to get the legs out place on a vice slightly open and push legs down, then just bend to 90 degrees with a pair of plyers
KISS
04 ST 3lt auto, not enough Mods to keep me happy, but getting there
In any moment of decision, the best thing you can do is the right thing, the next best thing is the wrong thing, and the worst thing you can do is nothing.