-
3rd February 2014, 05:11 PM
#1
Advanced
Radiator pressure cap
I've just received a heavy duty 3 core radiator to go in a 2000 zd30.
The radiator has a pressure cap on top where the original didn't.
Is there somewhere I can run this or is it not needed/can I block the outlet off?
The radiator still has the bigger hose which runs to the top overflow tank, which has a pressure cap on it.
-
-
3rd February 2014 05:11 PM
# ADS
Circuit advertisement
-
3rd February 2014, 05:29 PM
#2
Patrol God
Sounds like you guys have similar to the Ford setup.
Can you make a 100% seal to handle high pressure??
-
-
3rd February 2014, 05:33 PM
#3
Advanced
Originally Posted by
Westy's Accessories
Can you make a 100% seal to handle high pressure??
Hope so, I'm thinking I might be able to take out the outlet nipple and put a small bolt with some thread tape in there...
-
-
3rd February 2014, 05:35 PM
#4
Patrol God
Got a pic of New and original setup??
-
-
3rd February 2014, 05:55 PM
#5
Advanced
-
-
3rd February 2014, 08:17 PM
#6
Advanced
I ended up putting a small bolt in there. It was a weird thread so I had to tap it but it's all good now. Works a treat!
-
The Following User Says Thank You to boosh For This Useful Post:
BigRAWesty (3rd February 2014)
-
3rd February 2014, 08:21 PM
#7
Patrol God
-
-
3rd February 2014, 08:51 PM
#8
Patrol Freak
Mine comes from the cap. Its not a zd but still. I think my missus' olds ZD has a pipe from both. i dont really remember tho.
1999 GU DUAL FUEL 4.5 - 2" OME - 33's KM2s - SNORKEL - CUSTOM DINTS.... Goes by the name Candy (the car not me
)
-