-
25th January 2014, 02:20 PM
#1
Coolant Flush TD42
Hi guys.
Need a little help with my coolant system.
I've drained the radiator via the drain on the RHS but the engine drain plug is completely seized. Tried a range of breaker bars, crc etc but it won't budge. I'm sure if I get two mates and both yank on it it will break free but most likely it will break.
Is there another way to drain the coolant from the block. By the way whoever put that drain where it is should be flogged. Not very handy…..
HELP
Antz
-
-
25th January 2014 02:20 PM
# ADS
Circuit advertisement
-
27th January 2014, 10:23 AM
#2
Legendary
take bottom bose off and block hose then
pressureise system through radiator cap
2007 GU 6 /ST-L / MYO8 / DIESEL/AUTO /MOONSTONE /pro vent 200
OH LEATHER IS NICE
-
-
27th January 2014, 12:34 PM
#3
Try tightening it first, then back it off. Had issues with this on minis and works every time. Please don't swing off it when you tighten it though...
Hooroo
-
-
31st January 2014, 08:45 AM
#4
Cheers fellas, always nice to get assistance and not just some flak from a cross the ditch....
-
-
2nd February 2014, 11:35 AM
#5
you could also do a reverse flush through the heater hoses
-