-
20th January 2014, 05:32 PM
#11
Definitely something wrong with my deflator. I have the E-Z model and use it exactly the same as that. Possibly some kind of blockage in the line.
We looks like ill be heading to the shop when I fly home to get a replacement, as that video has put my faith back into a deflator provided it works.
Thanks for the vid upload MudRunnerTD
Dennis
Its not about going fast. Its about going somewhere
-
-
20th January 2014 05:32 PM
# ADS
Circuit advertisement
-
20th January 2014, 06:19 PM
#12
I bought a Kwiky Tyre Deflator from Tigerz, basically the same as all the rest but was only $23 with free postage at the time I ordered it.
Pretty simple piece of equipment so not much can go wrong with them.
http://www.tigerz11.com.au/product-c...eflator-1.html
-
-
20th January 2014, 07:11 PM
#13
Expert
I got an arb ezy deflator and also have a ferret as I found the arb to slow. The ferret is much quicker. Having no guage is alright as I have got use to how long it takes and I have a guage I can check them with. Will double check the arb to make sure I was doing it right
NEVER USE A SNATCH STRAP ON A TOW BALL AS DEATH MAY RESULT
GU 2005 Cab Chassis Ex Telstra POD, Set up for Remote Touring and Play
-
-
20th January 2014, 07:40 PM
#14
BIG & BALD
I too, have the EZ tyre deflater and I also have the Ferret tyre deflaters as spares.
2011 GU8 ST 3.0 CRD, ARB Bullbar with IPF spotties, scrub bars and side steps, Snorkel, Dual Battery system, Waeco fridge, Turbo Timer, ARB Roof Rack with 5 IPF spotties across the front, Custom full Leather Bucket seats, DPchip, 3" Taipan exhaust, ARE Intercooler & scoop, Autron EGT/Boost and dual volt gauges, ARB front locker.
-
-
20th January 2014, 09:04 PM
#15
Dribble Master
I've got the Stauns set to 26psi, pain in the absence to set up but so far haven't had to reset them. Also have the arb style jobbie which I find a little fiddly to use. Also have the ferret deflator which I use a lot, it's nice and compact so lives in my centre console.
-
The Following User Says Thank You to Clunk For This Useful Post:
the ferret (27th January 2014)
-
20th January 2014, 09:20 PM
#16
I am he, fear me
Ferret's is easily the fastest...
The OP wasn't undoing the valve far enough with the ARB, the air really rushes out when it is used correctly and I use mine every time I want to go to a pressure my Stauns aren't set too (18 PSI)
Stauns work awesome, mine are 7 years old and have never let me down (excuse the pun) but there are three things to do.
1. Make sure the locking ring is tight after you set them to your desired pressure. Use a small dab of loctite if you are ham fisted like me.
2. Dont turn them by the locking ring/adjuster when you put them on the valve stem or take them off. Use the knurling on the body. If the Stauns do have a design flaw that is it. Because everything is knurled it's easy to be slack and twist the wrong bit and change the settings if it's loose.
3. If you are buried in sand watch out you don't get any grains in the Staun during the recovery as it may hold them open
Do the above and Stauns (and their knockoffs) work brilliantly
Dolphins are so smart that within a few weeks of captivity, they can train people to stand on the very edge of the pool and throw them fish.
-
The Following 3 Users Say Thank You to the evil twin For This Useful Post:
Clunk (20th January 2014), gaddy (21st January 2014), MB (26th February 2024)
-
21st January 2014, 12:03 AM
#17
Patrol God
I take the valve out completely,with a air pressure gauge on hand,i do let my tyres down regulary to 10psi and I have found this is a good way to do it,quick easy and get them accurate with the gauge.
Watch this space, as there maybe a comment added soon
-
-
21st January 2014, 02:30 AM
#18
Nasty Dog - Moderator
I have the ARB deflator as well as a set of Stauns, but I only use The Ferret.....quick and easy
If any members require assistance in anything regarding this forum, just let me know via a PM and I will help you in any way that I can.
-
The Following User Says Thank You to Woof For This Useful Post:
the ferret (27th January 2014)
-
21st January 2014, 06:31 PM
#19
Enjoying the trips
Like Doggy I have the ARB deflator as well as a set of Stauns, 2 of the Stauns are set at 16psi the other 2 are set at 22 psi.
I'm getting lazy so use the Stauns, but mine are not as quick as TD's or I am quicker than him LOL
If I need other pressures the deflator gets a run then.
Cheers
Macca
-
-
27th January 2014, 06:46 PM
#20
Iv had stauns for about 5 or 6 years and they work great i have 2 set to 20 for the front n 2 set to 16 for the rear. I haven't re-adjusted them in ages and they're still pretty close to the pressures. They're quicker and i recon easier than my mates arb deflator.
-