Welcome to the Nissan Patrol forum. To post a question and to see less adds on the forum then you will have to register
first. We are an easy going friendly forum so join in the conversations and feel free to ask any questions.
Become a forum sponsor for only $20 and see no adds with faster page loading times and many extras benefits.
Sorry about the stupid qtn's but if you dont ask you dont know, ms
The only stupid thing to do is not ask, you have a wealth of great members here & all there knowledge to tap into.
This forum prides itself on its sharing of information & the friendly lay back atmosphere needed so members like yourself can feel comfortable in asking any & all types of questions.
Remember a question is only something you don't already know the answer to & when it comes to Patrols & off read adventuring what better place to ask.
$165 from repco for pbr master cylinder,
its worth it saves buying a wreakers job just to have the same thing happen again 6mths later..
Just gotta wait till its in on tuesday...
Sorry about the stupid qtn's but if you dont ask you dont know, ms
Hey mate as everyone else has said, there is no such thing as a stupid question on this forum, that is one of many things that makes us different to all the other forums and we are proud of it.
If any members require assistance in anything regarding this forum, just let me know via a PM and I will help you in any way that I can.
$165 from repco for pbr master cylinder,
its worth it saves buying a wreakers job just to have the same thing happen again 6mths later..
Just gotta wait till its in on tuesday...
Sorry about the stupid qtn's but if you dont ask you dont know, ms
Not a stupid question was there any fluid inside the car (footwell) where the rod comes through? Mine done it aswell,on a GQ though! Booster was fine just needed new master cylinder and it was fixed. One thing i done was put some fluid in the master cylinder before fitting, Makes bleeding easier, and the manual said it. Good luck, $165 sounds about right for the master cylinder.
89 GQ,
Yep thats a handy tip adding the fluid in the master cylinder pre fitting
You can actually pre bleed the master cylinder before fitting as well
Saves ALOT of air getting into the brake system
89 GQ,
Yep thats a handy tip adding the fluid in the master cylinder pre fitting
You can actually pre bleed the master cylinder before fitting as well
Saves ALOT of air getting into the brake system
Yep i done it on my clutch master as well and does make bleeding easier and quicker, Just leave the blue or red tabs in where the lines hook up and put a rag under when attatching brake lines.
Thanks heaps for all your tips and tricks on changing my master cylinder,
I will re-kit my old one for a backup or whatever,
I even went to the extent of bench bleeding it before we fitted it,
All went well now it stops like its never stopped before...... almost stops too good
Thanks. mike
Someone's Gotta Break 'Em... So It Might As Well Be Me!!.