OUR VIDEOS GALLERY MEMBER SPONSORSHIP VENDOR SPONSORSHIP

User Tag List

Results 1 to 6 of 6

Thread: Sticky speedo needle

  1. #1
    Beginner
    Join Date
    Mar 2013
    Posts
    17
    Thanks
    4
    Thanked 0 Times in 0 Posts
    Mentioned
    0 Post(s)
    Tagged
    0 Thread(s)

    Sticky speedo needle

    Hi everyone I have a 85 MK, and my speedometer needle is sticking on the face of the instrument dial because the sun or excessive heat has warped the needle so the tip of it is getting caught on the face. I have straightened it by heating it with cig lighter, worked a treat till the hot weather, now stuck with same problem! thinking of buying a 2nd hand cluster off ebay to pinch the needles off it $30 0r so its either that or try and melt a bit of thin mig (welding) wire up the guts of it so its more rigid and wont warp and scrape on the dial? if anybody has had the same problem and had another solution plz feel free to fill me!!!!! cheers guys!

  2. # ADS
    Circuit advertisement
    Join Date
    Always
    Posts
    Many

     

  3. #2
    Expert james008's Avatar
    Join Date
    Nov 2013
    Location
    Melbourne
    Posts
    126
    Thanks
    15
    Thanked 62 Times in 35 Posts
    Mentioned
    0 Post(s)
    Tagged
    0 Thread(s)
    I bent mine back, but did not use a lighter. I just gently massaged it back straight and it stayed there.
    I suppose you could glue a bit of wire to the back to strengthen it.
    Owned nothing but SWB Patrols
    '84 Red MK SD33T SWB, 31" A/T's, bullbar, spotties
    '86 Silver MK L28 SWB, 31" muddies, bullbar, steel canopy
    '86 White MK SD33T SWB, 31" A/T's, ARB bullbar, spotties, steel canopy
    '85 Silver MK SD33 SWB 31" A/T's, bullbar, light bar, 2" lift, snorkel

  4. The Following User Says Thank You to james008 For This Useful Post:

    Skids13 (1st February 2014)

  5. #3
    Patrol Guru
    Join Date
    Apr 2011
    Location
    Melton
    Posts
    882
    Thanks
    47
    Thanked 209 Times in 172 Posts
    Mentioned
    0 Post(s)
    Tagged
    0 Thread(s)
    I tried bending mine backin my old MK, ended up shortening the needle as the very tip bends and scrapes on the dash
    1991 GQ LWB 4.2 Carby dual fuel, 32 mud claws, 2 inch lift, LSD's front and back

    And its Toooooooo High for the Ball & chain

  6. #4
    Beginner
    Join Date
    Mar 2013
    Posts
    17
    Thanks
    4
    Thanked 0 Times in 0 Posts
    Mentioned
    0 Post(s)
    Tagged
    0 Thread(s)
    I end up pulling the old ciggy lighter out again to melt/ straighten it again works for now, was quoted $130 to have the cluster re calibrated, quick fix for now but for that price calibration mught not be a bad idea, thanx heaps guys!

  7. #5
    Advanced
    Join Date
    Mar 2012
    Posts
    33
    Thanks
    0
    Thanked 15 Times in 7 Posts
    Mentioned
    0 Post(s)
    Tagged
    0 Thread(s)
    I've got the same problem in my 85 MK.
    How do you get to the needle. Do you have to remove the whole cluster or is there an easy way to get to it?

    Cheers Ric

  8. #6
    Expert james008's Avatar
    Join Date
    Nov 2013
    Location
    Melbourne
    Posts
    126
    Thanks
    15
    Thanked 62 Times in 35 Posts
    Mentioned
    0 Post(s)
    Tagged
    0 Thread(s)
    I pulled my cluster out, removed the clear plastic cover and was very careful!
    Pulling the needle off and sticking back on can apparently damage some of the mechanism inside. That is what I have heard and didn't want to chance it.
    Owned nothing but SWB Patrols
    '84 Red MK SD33T SWB, 31" A/T's, bullbar, spotties
    '86 Silver MK L28 SWB, 31" muddies, bullbar, steel canopy
    '86 White MK SD33T SWB, 31" A/T's, ARB bullbar, spotties, steel canopy
    '85 Silver MK SD33 SWB 31" A/T's, bullbar, light bar, 2" lift, snorkel

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •