-
14th September 2013, 12:03 PM
#1
injector pump leaking.
I have noticed the last few weeks with my gq td42 sitting under the carport is leaking diesel. From what i can see it leaking from under the injector pump. Does the usually mean i'm up for the expensive pump rebuild or can i just to the seal or whatever is causing the leak?
-
-
14th September 2013 12:03 PM
# ADS
Circuit advertisement
-
14th September 2013, 02:11 PM
#2
Patrol God
There are a few seals that can leak that can be replaced while on the car. You can get full seal kits for theses pumps for stuff all.
-
-
14th September 2013, 03:20 PM
#3
Administrator
Give it a good clean to find out exactly where It's leaking first.
If It's the top seal then you can replace it without taking pump out, so pray its the top one!
Have a read of my thread below, happened to me a while back.
http://www.nissanpatrol.com.au/forum...r-Pump-GQ-TD42
-
-
14th September 2013, 10:13 PM
#4
It's def coming from the bottom of the pump at the front. It's the only place you can see the wetness it's leaving behind.
-
-
14th September 2013, 10:49 PM
#5
Patrol God
There is a plate on the side I think which is pretty close to the bottom the oring can perish on this and leak.
-
-
15th September 2013, 09:04 AM
#6
Originally Posted by
nissannewby
There is a plate on the side I think which is pretty close to the bottom the oring can perish on this and leak.
Kook will hav a close look at it.
-
-
3rd October 2013, 07:34 PM
#7
think i found the leak. Pretty sure its the place nissanewby is saying. It looks like its coming from a plate on the driver side of the pump that liiks like a similar shape to a thermostat housing/gasket. Is this just an oring?
-
-
3rd October 2013, 08:48 PM
#8
Patrol God
Yeah just an oring the same shape as that plate.
-
-
5th October 2013, 08:57 AM
#9
I have piles of spare o-rings for the td pumps. Your can have some if you want them. Im north of brissy. If it helps.
-
-
10th October 2013, 01:59 PM
#10
Originally Posted by
nissannewby
Yeah just an oring the same shape as that plate.
sweet
Originally Posted by
BauerPower
I have piles of spare o-rings for the td pumps. Your can have some if you want them. Im north of brissy. If it helps.
would you post. wat o ring will i need.
-