-
5th August 2017, 09:55 AM
#3961
.........
Originally Posted by
GQtdauto
Thanks for that MB , doesn't say what pressure the hose will handle , brother in law bought one similar price and it blew the hose at 100 psi , not sure what brand but ended up with a nearly $200 one from an industrial retail joint . I'm after the auto inflate unit to fit in the back of the GQ , it is pricey but less interruptions when your having a can or two waiting for the tyres to pump up .
It reckons on the spec sheet 170psi but time will tell :-)
image-2540631143.jpg
I'm a little worried about it being a cheapo retractor spring inside too as it'll get used quite a bit on our block also. Here's hoping for a few years on the reel at least as mounting them both indoors inside the extra cab.
-
The Following User Says Thank You to MB For This Useful Post:
GQtdauto (5th August 2017)
-
5th August 2017 09:55 AM
# ADS
Circuit advertisement
-
5th August 2017, 10:04 AM
#3962
Legendary
The one the brother in law bought was a SCA unit , I was almost going to buy one of those proxy air dragon pumps they advertise on tv and remove the electrics and chuck away the rest but after seeing that unit I will put it on the list for the cape trip next year .
Don't think I have the room for the hose reel unfortunately but want the auto inflator unit .
-
The Following User Says Thank You to GQtdauto For This Useful Post:
-
5th August 2017, 12:32 PM
#3963
Patrol God
Went and bought filters all 'round, oils, etc... Few 12V gadgets! First $ spent on her in a couple of months.
-
The Following User Says Thank You to Hodge For This Useful Post:
-
5th August 2017, 01:17 PM
#3964
.........
Originally Posted by
GQtdauto
......Don't think I have the room for the hose reel unfortunately but want the auto inflator unit .
Quick tests on the new toy, quite happy in the end, now to find some time to install it all :-)
image-1755340137.jpg
Deflation test video:
https://youtu.be/i7CGMYmN9qQ
Inflation test video:
https://youtu.be/FqSqq69jtWk
(Apologies the first video came out sideways :-( )
-
The Following 3 Users Say Thank You to MB For This Useful Post:
Clunk (5th August 2017), GQtdauto (5th August 2017), Yeti's Beast (5th August 2017)
-
5th August 2017, 03:15 PM
#3965
Legendary
Originally Posted by
MB
Just what the lazy man who has everything needs for Christmas , thanks for the video mate , I reckon it's the ducks nuts .
Set and forget , when it beeps you're done next tyre , what's not to like .
-
The Following User Says Thank You to GQtdauto For This Useful Post:
-
5th August 2017, 05:41 PM
#3966
The 747
How would you go making a small manifold with 4 outlets, hooked up to each tyre and pumping all 4 up at once?
Sent from my SM-G935F using Tapatalk
-
The Following 2 Users Say Thank You to Winnie For This Useful Post:
GQtdauto (5th August 2017), MB (5th August 2017)
-
5th August 2017, 05:49 PM
#3967
.........
Only drama I believe Winnie mate would be connecting and disconnecting all 4 in under 0.5 seconds before tyres all deflate if I'm thinking correctly?
-
-
5th August 2017, 05:53 PM
#3968
The 747
Have a tap on the main line and close it while you're connecting up, then close it off once finished?
Sent from my SM-G935F using Tapatalk
-
The Following User Says Thank You to Winnie For This Useful Post:
-
5th August 2017, 05:59 PM
#3969
.........
AhHa, a tap, derr MB, good idea mate ;-)
-
-
5th August 2017, 07:14 PM
#3970
Expert
Use female Nitto fittings on the manifold to hold pressure whilst connecting. Also means you won't need plugs for outlets not being used.
-
The Following User Says Thank You to UncleFrosty For This Useful Post: