-
16th July 2014, 03:35 PM
#121
Ive thrown in 8 sheets to the front of the wagon (over the top of the dynamat) on the floor pan and a wee bit up the firewall and it has cut out more of the road noise. only cost 90 bucks and 20$ for a can of spray on adhesive.
-
-
16th July 2014 03:35 PM
# ADS
Circuit advertisement
-
16th July 2014, 04:40 PM
#122
Expert
what about this product from Jaycar , seems to combine Buty and Foam
http://www.jaycar.com.au/productView.asp?ID=AX3689
2012 GU Patrol Simpson Edition. Auto. UHF, Bull Bar, 2" lift with Koni shocks, dobinson coils. 3" stainless Steel Exhaust.
-
-
16th July 2014, 10:17 PM
#123
Patrol God
Originally Posted by
Ronin
I did look at that but it's only 3mm thick..
It woukd be a good half way point.
If your looking for a solid decrease then the only way to do it is mass loading the panels the a good thick layer of sound absorbing material.
-
-
17th July 2014, 01:53 PM
#124
Expert
so compared to that, Luxary Liner Pro looks better
Specification
Sheet size = 24" x 54" (9 sq. feet)
Thickness = between 1/4" - 1/2" (.25" .5")
Mass/Area = 1.2 lbs. per sq foot
Total weight per sheet = 10.80 lbs. per sheet
http://store.secondskinaudio.com/lux...q-ft-4-sheets/
2012 GU Patrol Simpson Edition. Auto. UHF, Bull Bar, 2" lift with Koni shocks, dobinson coils. 3" stainless Steel Exhaust.
-
-
22nd July 2014, 06:57 AM
#125
Patrol God
That does look better on paper..
-
-
23rd July 2014, 07:25 AM
#126
has someone done yet a dampenig job for a Y60 gr
-
-
23rd July 2014, 09:51 AM
#127
Patrol God
Originally Posted by
GRY60
has someone done yet a dampenig job for a Y60 gr
Yep, we've only done y60's
-
-
24th July 2014, 03:01 PM
#128
After what I've done there is a definitely difference how ever the main issue is motor noise for me (td42+t) if I cut that down she would be a silent killer.
-
-
25th July 2014, 06:02 PM
#129
Patrol God
I think that's mission impossible mate. I doubled up the fire wall and still get engine noise. Greatly reduced but it's still there. I'm Na, so turbo should be better
-
-
29th July 2014, 02:25 PM
#130
I have been through same process with dynamat throughout and main issue is also now engine noise (td4.2 + t) - I am looking at bonet lining to help reduce engine noise and wondering if anyone else has done this and if so what brands and success ?
-