-
26th June 2010, 07:58 PM
#1
Administrator
Repairing Rust on your 4x4.
-
The Following 4 Users Say Thank You to AB For This Useful Post:
ahimz (11th November 2013), damaverick (5th October 2012), SammiGQ (19th March 2012)
-
26th June 2010 07:58 PM
# ADS
Circuit advertisement
-
17th November 2010, 10:15 PM
#2
how do you spray the car afterwards so that it looks good? I canīt get a good result!
-
-
18th November 2010, 09:39 PM
#3
Seems a bit simple for a proper job ok for a quick bog up tho'
-
-
18th November 2010, 09:52 PM
#4
yeah thats exactly what i was thinking
-
-
20th February 2011, 11:50 PM
#5
useful tip, does make it look easy tho, i find painting with a can hard if your doing a larger area the job looks striky
-
-
20th February 2012, 12:49 AM
#6
cheers! I've got a bit of this to do soon!
-
-
25th February 2012, 08:23 PM
#7
Beginner
Great video I hope there are more like this
What would you be if you were attached to another object by an incline plane wrapped helically around an axis?
Screwed.
-
-
25th March 2012, 10:43 PM
#8
This will definatley help me in the future. It's one thing I haven't really attempted yet.
-
-
24th May 2012, 05:48 PM
#9
I am doing rust repair on my bonnet this weekend so this is a great video thanks for your help!
-
-
24th May 2012, 06:11 PM
#10
Heres a few tips i have used when blending in rub the area back around the repair using a 1000 -1500 grade paper wet and use a retarder thinners helps the blend in.
I always use a rust proofing behind the repair otherwise it will come back twice as bad.
Not a fan of bodgie bog jobs personally i would replace the rusted sections with new metal.
As for lines in the paint job usually i see that when not enough thinners is used i usually have a 70/30 mix with acrylic paint.
Or the job is in the sun and 2 hot.
But if it is acrylic a rub down with a fine grade paper using a block and soapy water afterwards to flatten out the surface then a polish usually brings out a nice finish.
-