finally installed my provent oil catch can today on my 2.8 GQ after its been sitting in my garage for months..
i bought some 1'' to 5/8 silicone reducers from ebay. quite cheap!
http://www.ebay.com.au/itm/AeroFlow-...291132c&_uhb=1
16mm barb fittings
http://www.ebay.com.au/itm/Brass-Fit...d4e6246&_uhb=1
and i found cheap teflon braided hose
http://www.ebay.com.au/itm/281111081...84.m1439.l2649
photo.JPG
now i just need to run some clear tube at the bottom with a brass tap at the end and place it somewhere accessible for emptying..
very happy with the result..
i will take note of the kilometres and check how much oil has been filtered after 1000 klms and put another post here..