Shock absorber advice

[BigRAWesty]

This is my 2" OME about 3/4 flex...
1379075940415.jpg
1379075950585.jpg
Rear factory disconnect disconnected, but front sway bar still fitted..

I have removed front sway bar it it is alot nicer and gained another 50mm I reckon..

[Winnie]

I would love the front of my car to flex like Darren's but my front does not flex much at all.

[taslucas]

I would love the front of my car to flex like Darren's but my front does not flex much at all.

Still got your front sway bar fitted?

[Winnie]

Yep, and rear lmao.

[Jens]

Hey MudRunner,

Those measurements were fully open. Sounds like the Amada and Profenders would be the way to go. Did you purchase the 2" flexy coils when you had them on your truck? I'm not really keen on blowing decent shocks either, so if you did, I'll probably have to get bump stops and see if that helps.

Also how much did you extend your brake lines when you had the flexy coils?

Thanks very much for your help mate. This is why I joined the forum. Haha. Cheers

[megatexture]

You won't notice the front removed on road, but you will the rear

[Winnie]

You won't notice the front removed on road, but you will the rear

My old one had the rear disconnects, but this one doesn't. I might just take the front ones out then?


Sent from my iPad using Motorculture mobile app

[taslucas]

My old one had the rear disconnects, but this one doesn't. I might just take the front ones out then?


Sent from my iPad using Motorculture mobile app

Can just undo them and take it for a drive to see if it's still half decent on the black top

[Winnie]

Might just unbolt them when I go away and cable tie them up, leave them on when on the road.


Sent from my iPad using Motorculture mobile app

[megatexture]

My old one had the rear disconnects, but this one doesn't. I might just take the front ones out then?


Sent from my iPad using Motorculture mobile app

I've removed my front and the rear is broken for the 2nd time , just unbolt one side so you don't have to zip it up