-
10th September 2013, 05:12 PM
#11
Expert
http://www.runvawinch.com.au/wp-cont...00-DRAWING.jpg
Mic I think it should fit mate. Just checked the web site, and measurements against the ARB bar and there is plenty of room. Have a look at the specifications. Any way if ARB are fitting they can fit before the bar is fitted.
Good talking to you
Last edited by Steve4wdin; 10th September 2013 at 05:22 PM.
-
The Following User Says Thank You to Steve4wdin For This Useful Post:
MEGOMONSTER (10th September 2013)
-
10th September 2013 05:12 PM
# ADS
Circuit advertisement
-
10th September 2013, 06:29 PM
#12
Legendary
Mego,
I have a ARB Deluxe Bar with a Warn XP95 winch ... plenty of room around it.
I will take some pictures if you like
Mic
GU PATROL 2011 Ti, with goodies...
-
The Following User Says Thank You to happygu For This Useful Post:
MEGOMONSTER (10th September 2013)
-
10th September 2013, 06:54 PM
#13
BIG & BALD
Originally Posted by
happygtu
Mego,
I have a ARB Deluxe Bar with a Warn XP95 winch ... plenty of room around it.
I will take some pictures if you like
Mic
Yes a 9500lb winch will fit but I have a 12000lb Runva which is/may be the problem.
2011 GU8 ST 3.0 CRD, ARB Bullbar with IPF spotties, scrub bars and side steps, Snorkel, Dual Battery system, Waeco fridge, Turbo Timer, ARB Roof Rack with 5 IPF spotties across the front, Custom full Leather Bucket seats, DPchip, 3" Taipan exhaust, ARE Intercooler & scoop, Autron EGT/Boost and dual volt gauges, ARB front locker.
-
-
10th September 2013, 07:00 PM
#14
Expert
The 223mm you are talking about is length of drum not diameter. You have stacks of room. Trust me I'm a ....... Fitter
163mm is diameter of drum.
Last edited by Steve4wdin; 10th September 2013 at 07:05 PM.
-
The Following User Says Thank You to Steve4wdin For This Useful Post:
MEGOMONSTER (11th September 2013)
-
10th September 2013, 07:01 PM
#15
BIG & BALD
Originally Posted by
Steve4wdin
The 223mm you are talking about is length of drum not diameter. You have stacks of room. Trust me I'm a ....... Fitter
Trust me, I'm NOT.
2011 GU8 ST 3.0 CRD, ARB Bullbar with IPF spotties, scrub bars and side steps, Snorkel, Dual Battery system, Waeco fridge, Turbo Timer, ARB Roof Rack with 5 IPF spotties across the front, Custom full Leather Bucket seats, DPchip, 3" Taipan exhaust, ARE Intercooler & scoop, Autron EGT/Boost and dual volt gauges, ARB front locker.
-
-
10th September 2013, 07:27 PM
#16
BIG & BALD
Originally Posted by
Steve4wdin
Trust me I'm a ....... Fitter
Diameter is not my concern but length if motor.
2011 GU8 ST 3.0 CRD, ARB Bullbar with IPF spotties, scrub bars and side steps, Snorkel, Dual Battery system, Waeco fridge, Turbo Timer, ARB Roof Rack with 5 IPF spotties across the front, Custom full Leather Bucket seats, DPchip, 3" Taipan exhaust, ARE Intercooler & scoop, Autron EGT/Boost and dual volt gauges, ARB front locker.
-
-
10th September 2013, 07:43 PM
#17
BIG & BALD
Can you dummy fit the winch with the bar on.
2011 GU8 ST 3.0 CRD, ARB Bullbar with IPF spotties, scrub bars and side steps, Snorkel, Dual Battery system, Waeco fridge, Turbo Timer, ARB Roof Rack with 5 IPF spotties across the front, Custom full Leather Bucket seats, DPchip, 3" Taipan exhaust, ARE Intercooler & scoop, Autron EGT/Boost and dual volt gauges, ARB front locker.
-
-
10th September 2013, 09:47 PM
#18
BIG & BALD
Thank you for all that have helped tonight.
I found a mate who had recently fitted a bar but no winch so I took my Runva Ewx12000 over to his house and completely fitted the winch itself to the bull bar.
And it fits, snugly with about 10mm to spare but it fits no probs at all
Steve you were 100% correct and thank you for your help over the phone today.
2011 GU8 ST 3.0 CRD, ARB Bullbar with IPF spotties, scrub bars and side steps, Snorkel, Dual Battery system, Waeco fridge, Turbo Timer, ARB Roof Rack with 5 IPF spotties across the front, Custom full Leather Bucket seats, DPchip, 3" Taipan exhaust, ARE Intercooler & scoop, Autron EGT/Boost and dual volt gauges, ARB front locker.
-
The Following 2 Users Say Thank You to MEGOMONSTER For This Useful Post:
BigRAWesty (10th September 2013), Steve4wdin (11th September 2013)
Posting Permissions
Reply With Quote