Got the boost gauge rattle

[Nvd323]

Hi all.
Im really over the boost gaugue rattle in my GU. I've tryed putting a damper in the vac line which helped but its still there. The question is what gauge do i get that is deffinitly not going to rattle and wont break my bank.

Cheers Ryan

[fishnsurf]

Howdy I have a auto meter Cabot it's been installed for about 18mths and has not missed a beat would recommend them def no noise .... I was told the noise was from a leak but not sure ... My hose from intercooler pipe to gauge is the small hard plastic type ...

[Ben-e-boy]

I have boost and oil on the right hand side of the instrument cluster, the gauges are kn pods and the are velcroed to the dash, together and to the a pillar, havent moved in 3 years

[trekster]

Buy a digital one then it won't rattle

[Nvd323]

Hey that's true didn't think of a digital one that's and idea. Any one using VDO ? A mate of mine had one seems to good. My gauge isn't designed for the diesel motor that's y I'm getting the rattle and Major bouncing of the needle at idle...

[Parksy]

I take it that it's a mechanical gauge with a hose from the engine? If that's the case then the hose acts like a stethoscope and the gauge just amplifies the noise in the cabin. It's worse when using copper hose, but apparently putting a loop in the hose before it enters the cabin can help.

[Nvd323]

Yeahhh mech gauge plastic line. Yeah did read that while searching google. I dont think I've left enough hose though ill go buy rubber line tomorrow or might just get a auto meter gauge for diesel boost

[trekster]

If you're on a budget like me I bought a digital boost gauge from repco when they had the sale $39, it's for a petrol but that doesn't matter to me as it just sits on 0 when not on boost....


Cheers,
Eric.

[Nvd323]

Cheers trekster ill check that out tomorrow are they 52mm?

[trekster]

Cheers trekster ill check that out tomorrow are they 52mm?

Yeah mate and they are on special again!


http://catalogues.repco.com.au/offer...urce=catalogue


They come with their own map sensor and you just hook it all up and away you go!