I am seeking advice from members who have installed and used the AVM HP hubs.
I have a set of AVM HP Manual Hubs, to replace my Auto hubs on my GU IV, on order, should arrive early next week.
I have searched this site and the web to find details on fitting. The issues that have come up based on all the "guff" I found are these:
Some recommend using locktight on all the bolts, both base plate and top cover, others recommend against because the cover Torx bolts strip easily, yet others suggest using anti sieze spray.
Some suggest using sowing machine oil to lubricate prior to fitting, others suggest a smear of wheel bearing grease or "pack" and yet others suggest nothing at all.
Torque settings for both set of bolts (base plate and cover) are nowhere to be found.
Would appreciate comments from those with direct experience.
I have removed and reinstalled the Auto hubs in the past using a "smear" of wheel bearing grease, that was straight forward.