24th August 2013, 07:52 PM
#1
Patrol God
What's this plug all about ? Foggies ?
Had the dash half apart today again, to re-fit my stereo and wire up the rest of the UHF unit.
Realized there is a spare plug of some sort zippy-tied to the cabling for the hazard switch and rear demister. It's brown, and I've got a green circle around it in the photo. Is this the switch for for-lights by any chance ??? If not what is it?
24th August 2013 07:52 PM
# ADS
Circuit advertisement
24th August 2013, 07:57 PM
#2
Legendary
Hodge,
No idea what the wire is for, but it is unlikely to be fog-lights, as the factory switch for the fog-lights is on the steering column.
Mic
GU PATROL 2011 Ti, with goodies...
24th August 2013, 08:12 PM
#3
Patrol God
Originally Posted by
happygtu
Hodge,
No idea what the wire is for, but it is unlikely to be fog-lights, as the factory switch for the fog-lights is on the steering column.
Mic
Cheers happy. Interesting that, I need to research as I have unwired foggies in my bullbar.
25th August 2013, 09:25 AM
#4
Patrol God
Yendor would be your man for this one
04 ST 3lt auto, not enough Mods to keep me happy, but getting there
25th August 2013, 11:10 AM
#5
It's for the factory diff lock switch.
The Following User Says Thank You to Yendor For This Useful Post:
nissannewby (25th August 2013)
25th August 2013, 06:45 PM
#6
Patrol God
Originally Posted by
Yendor
It's for the factory diff lock switch.
Thanks for clarifying that mate. So from a bit of reading the wiring for switch / foggies is in steering column, in RHS stalk ?
25th August 2013, 08:25 PM
#7
Yes the connector for the fog light switch is in the harness that runs up the steering column.
It should be near the connectors for the ignition switch and combination switch.
The Following 2 Users Say Thank You to Yendor For This Useful Post:
cgm (26th August 2013), nissannewby (25th August 2013)
25th August 2013, 09:01 PM
#8
Patrol God
Originally Posted by
Yendor
Yes the connector for the fog light switch is in the harness that runs up the steering column.
It should be near the connectors for the ignition switch and combination switch.
Thanks again mate. Will rip it apart tomorrow and have a look. Cheers.
25th August 2013, 09:20 PM
#9
The connector is white and should look like E129.
The wire colours are
Pin 32 Red wire
Pin 31 Blue with a Black trace wire.
Attached Images
The Following User Says Thank You to Yendor For This Useful Post:
nissannewby (25th August 2013)
25th August 2013, 10:23 PM
#10
Patrol God
Originally Posted by
Yendor
The connector is white and should look like E129.
The wire colours are
Pin 32 Red wire
Pin 31 Blue with a Black trace wire.
You are too good Yendor. I have thrown you some thanks.
The Following User Says Thank You to nissannewby For This Useful Post:
Yendor (25th August 2013)