-
4th August 2013, 11:32 AM
#51
Id use a router over a lathe, they make me nervous lol I've seen more injuries and close calls from wood lathes.
-
-
4th August 2013 11:32 AM
# ADS
Circuit advertisement
-
4th August 2013, 11:37 AM
#52
Rotaredom
Originally Posted by
megatexture
Id use a router over a lathe, they make me nervous lol I've seen more injuries and close calls from wood lathes.
Should see me with a chainsaw after a few beers, my kids now have 000 on speed dial
Time is never wasted when your wasted all the time
WARNING: Towballs used for recoveries can, and do kill people and damage property.
-
The Following User Says Thank You to NissanGQ4.2 For This Useful Post:
GQtdauto (9th January 2019)
-
4th August 2013, 01:41 PM
#53
Expert
Originally Posted by
NissanGQ4.2
Thanks Steve for the offer
Will give it a go myself first, If I ballz it up I will send you a PM or 3 *L*
Still welcome 2 drop in for a beer when travelling past downtown Warrimoo
You don't happen 2 know any good plumbers / tilers that you could recommend..... need to do an en suite as well and more than likely will be out of my basic building skills
Cheers
Todd
I did all my own plumbing and tiling. Just got someone into fix in shower screen. Offer still stands
Steve
-
The Following User Says Thank You to Steve4wdin For This Useful Post:
NissanGQ4.2 (4th August 2013)
-
9th January 2019, 07:35 PM
#54
-
The Following 2 Users Say Thank You to MB For This Useful Post:
GQtdauto (9th January 2019), rusty_nail (9th January 2019)
-
9th January 2019, 10:58 PM
#55
Patrol God
Hey Todd,
Long time.
Anyways mate, If it was me,( And I run my own HandyMan business now) I'd by a Ryobi 2200W 305mm Slide Compound Mitre Saw
from Bunnings.
You will do nearly all cutting you ever need to, you could buy a few different blades for this saw, so you have a finishing blade for architraves (60 tooth), and a multi purpose(40 tooth) and an aluminium cutting blade.
If you have a slide compound, you never need another saw on the bench. If get a mitre saw, one day you'll need the slide and wont have it.
I was Ryobi everyday cant fault them.
But as always choice is yours
Getting Older Is Unavoidable, Growing Up Is Optional!
-
The Following 2 Users Say Thank You to Finly Owner For This Useful Post:
GQtdauto (10th January 2019), MB (9th January 2019)
-
9th January 2019, 11:22 PM
#56
Travelling Podologist
Hand held circular saw.
Makita LS1016 compound mitre slide saw
Triton work bench (table saw)
All were very useful building our place. The Makita replaced an old Ryobi drop saw I had which karked it a day or two after the framing timber arrived. Swore at the time about the unexpected cost of replacement, but looking back having a compound slide saw made many tasks so much easier, & some possible that I couldn't have done without the old saw.
2006 4.2TDi ex-Telstra Remote area Camper. 425w roof mounted solar, 360Ah Aux batts, BCDC1240, Onboard hot & cold pressurised & filtered water, (25 litre hot water calorifier), ARB fridge, ARB freezer, Built in kitchen, heaps of easy access storage, 240v, 3” Genie exhaust + dynotune, 2” lift, 3900kg GVM upgrade, second glovebox, ROH Blaktrak steel wheels, Bridgestone D697's (now Toyo RT's), Redarc gauges/pillarpod, Hema HX-1, Icom 450 CB, dual rear view cameras, Onboard 30amp Victron mains charger, second glovebox, dual seat conversion, TPMS, Boss PX7 onboard air with 9 litre tank, 350w inverter, Steel bullbar, Harrop Eaton diff lock (front), Warn winch, Snorkel, Dual spares , 160 litre water tank, 180 litre fuel in two tanks (approx 1200km range) 2010 Tvan Tanami. (incl another 70 litre water tank) with matching wheels/tyres (& 3rd spare)
A Nomadic Life (Blog)
-