GQ 4.2 EFI Automatic Gearbox Computer Location

[NissanGQ4.2]

This is the location of the Auto's Gearbox Computer

Will try and post up some other info about the Computer and what it does when i get some time.

How many wires do u need!!! think its less than the ECU

IMG_4355(2).jpg

IMG_4354(2).jpg

IMG_4353(2).jpg

IMG_4352(2).jpg

IMG_4351(2).jpg

[GQ UTE]

Hey todd I do believe that is the ECU thats in the main photos and the one mounted on the inside of the kick panel is for the auto!
My old EFI patrol had that computer but not the one on the kick panel side!
Cheers

[NissanGQ4.2]

Hey todd I do believe that is the ECU thats in the main photos and the one mounted on the inside of the kick panel is for the auto!
My old EFI patrol had that computer but not the one on the kick panel side!
Cheers

Thanks for the info Trent, I'm pretty sure its right, but will look into it, I assume different models had them set up differently

Cheers

Todd

[the evil twin]

Hey todd I do believe that is the ECU thats in the main photos and the one mounted on the inside of the kick panel is for the auto!
My old EFI patrol had that computer but not the one on the kick panel side!
Cheers

X2... I'm with GQUte

The box you have labelled in the Piccies is actually the engine ECU (Nissan P# 23710)

The Auto G/Box ECU in a series 2 GQ TB42(EFI) is the box on the left in the bottom two piccies. When modd'ing GQ's for Torque Converter Lock Up circuits I used to attach the relay to the top of teh Unit and the wiring runs from the plug underneath. There is a mounting screw for teh trim that is a real PIA if you get it wrong

[NissanGQ4.2]

Thanks ET and GQ UTE for the correction.. Thread is now located here: http://www.nissanpatrol.com.au/forum...ntrol-Unit-%29