-
28th June 2013, 06:02 PM
#1
Smart like tractor
my tray build.
Gday.
I am starting to get some steel together for my tray build.
My head stock and brace arrived today, I got that bent up by bendpro in Maryborough, its 3nch, 3.2mm wall seamless pipe all mandrel bent.
The 2 chassis rails are 2 inch pipe, 3mm wall and the bends are for the wheel arches. All I need to get bent up now is the outer rails.
The tray is going to be 1.8m wide, 2m long. The outer rails arnt going to match the inner rails. The are going to taper out to about 1.9 over the rear wheel and taper back in to the rear of the tray. The wheel arches them selves are just going to made out of steel plate.
1372403730968.jpg
1372403733137-1.jpg
96 GQ coil/Cab
08 G6eT
-
-
28th June 2013 06:02 PM
# ADS
Circuit advertisement
-
28th June 2013, 06:08 PM
#2
-
-
28th June 2013, 06:10 PM
#3
Patrol God
Will be watching. Have fun with it..
Kallen Westbrook
Owner of
Westy's Accessories
-
-
28th June 2013, 06:18 PM
#4
The 747
-
-
28th June 2013, 06:27 PM
#5
Patrol God
Should look good are you welding steel checker plate or popping polished alloy checker plate on.
So many questions ATM
04 ST 3lt auto, not enough Mods to keep me happy, but getting there
-
-
28th June 2013, 06:46 PM
#6
Smart like tractor
Originally Posted by
threedogs
Should look good are you welding steel checker plate or popping polished alloy checker plate on.
So many questions ATM
All steel mate.
96 GQ coil/Cab
08 G6eT
-
The Following User Says Thank You to Ben-e-boy For This Useful Post:
threedogs (28th June 2013)
-
28th June 2013, 07:04 PM
#7
Patrol God
-
-
28th June 2013, 07:13 PM
#8
Patrol God
04 ST 3lt auto, not enough Mods to keep me happy, but getting there
-
-
28th June 2013, 07:38 PM
#9
Smart like tractor
Originally Posted by
threedogs
recessed space cases??
Havnt planned that yet I want to move the batteries to the back and install the air compressor and tank.
If I can find some space cases the right size I will throw some in
96 GQ coil/Cab
08 G6eT
-
-
28th June 2013, 08:02 PM
#10
Administrator
Awesome benny, keep the thread up to date mate, interesting to see it unfold!
-