my tray build.

[Ben-e-boy]

Gday.

I am starting to get some steel together for my tray build.
My head stock and brace arrived today, I got that bent up by bendpro in Maryborough, its 3nch, 3.2mm wall seamless pipe all mandrel bent.
The 2 chassis rails are 2 inch pipe, 3mm wall and the bends are for the wheel arches. All I need to get bent up now is the outer rails.
The tray is going to be 1.8m wide, 2m long. The outer rails arnt going to match the inner rails. The are going to taper out to about 1.9 over the rear wheel and taper back in to the rear of the tray. The wheel arches them selves are just going to made out of steel plate.

1372403730968.jpg

1372403733137-1.jpg

[growler2058]

Bout bloody time I've been waiting for such a thread


Sent from my iPhone using Motorculture mobile app

[BigRAWesty]

Will be watching. Have fun with it..

Kallen Westbrook
Owner of
Westy's Accessories

[Winnie]

Very shmexy.......

[threedogs]

Should look good are you welding steel checker plate or popping polished alloy checker plate on.
So many questions ATM

[Ben-e-boy]

Should look good are you welding steel checker plate or popping polished alloy checker plate on.
So many questions ATM

All steel mate.

[nissannewby]

Galvanised once done??

[threedogs]

recessed space cases??

[Ben-e-boy]

recessed space cases??

Havnt planned that yet I want to move the batteries to the back and install the air compressor and tank.
If I can find some space cases the right size I will throw some in

[AB]

Awesome benny, keep the thread up to date mate, interesting to see it unfold!