Ironman 4x4

[Ironman 4x4]

I have another enquiry about the load equaliser I am thinking to put on my boat trailer. Can you gets a quote and can they be used on trailers.

Hey Mate,

That's an interesting one. I've just had a chat to our suspension manager and:

If they leafs on the trailer are 50mm wide? Most trailers are; then we'll have one that matches in width, which is a good start. After that the load plus spring is 310mm long, in order for it to fit you would need the space between the back of the diff/Axel and the shackle or mounting point at the rear of your leafs to be at least 310mm long, ideally longer.

Now we make no guarantees that this will work perfectly without having someone take a look a measure up the suspension, but if it meets the above criteria then I don't foresee you having an issue. Also they should be $125 for the set.

[Ironman 4x4]

Hey Guys,

Looks like we are going a bit off topic on here now. Mick, how about you start a new thread for people to talk about it in more detail.

Cheers!

[Bloodyaussie]

Yeah or a big green steroid freak will bust you up!!!

[MEGOMONSTER]

Hey Guys,

Looks like we are going a bit off topic on here now. Mick, how about you start a new thread for people to talk about it in more detail.

Cheers!

I already have its been going for a week now.

[MudRunnerTD]

Hey Guys,

Looks like we are going a bit off topic on here now. Mick, how about you start a new thread for people to talk about it in more detail.

Cheers!

I already have its been going for a week now.

Hey Mick i have moved all the chat over to your other thread mate.

Cheers MR

[MEGOMONSTER]

Hey Mate,

That's an interesting one. I've just had a chat to our suspension manager and:

If they leafs on the trailer are 50mm wide? Most trailers are; then we'll have one that matches in width, which is a good start. After that the load plus spring is 310mm long, in order for it to fit you would need the space between the back of the diff/Axel and the shackle or mounting point at the rear of your leafs to be at least 310mm long, ideally longer.

Now we make no guarantees that this will work perfectly without having someone take a look a measure up the suspension, but if it meets the above criteria then I don't foresee you having an issue. Also they should be $125 for the set.

Who would you recommend me see about this.
I am in Victoria, Werribee (western suburbs.)

[Ironman 4x4]

Who would you recommend me see about this.
I am in Victoria, Werribee (western suburbs.)

Hey mate,

You could try:

Extreme
22 Horne Street
Hoppers Crossing, 3029
VIC, Australia
Mick
Phone: 9369 0045

Otherwise the next closest distributor would probably be over in the eastern suburbs (in which case you may as well drop into our Dandenong South Head Office.

[MEGOMONSTER]

Hey mate,

You could try:

Extreme
22 Horne Street
Hoppers Crossing, 3029
VIC, Australia
Mick
Phone: 9369 0045

Otherwise the next closest distributor would probably be over in the eastern suburbs (in which case you may as well drop into our Dandenong South Head Office.

Yep , I know where they are.

[bordertech]

If your in south east SA or far western Vic I am an Ironman distributor centrally located in Bordertown SA - Bordertrek 4x4 & Fabrication. We supply and install and also modify and fabricate custom gear if required (vehicle sometimes required) I rate Ironmans gear and service very highly and great value for money and we have great treks around here that really put all 4wd gear to the test.
Also if you want any info on tracks around here feel free to pm me.
Regards, Dave
Bordertrek 4x4

[kevin07]

so have you decided what you will do about my bullbar .thanks kev