-
22nd December 2013, 10:56 AM
#2001
The 747
On real hot days it can creep just over half way on the temp gauge. Would not trust it in the Simpson, I need a new fan and shroud now anyway and while it's all out I will reco the fan clutch.
-
-
22nd December 2013 10:56 AM
# ADS
Circuit advertisement
-
22nd December 2013, 11:19 AM
#2002
Patrol God
Doesn't necessarily mean it's your rad. The earlier td42 did have issues with the thermostats and there is mods or different types you could use. Also things like your condenser could be clogged, make sure all the rubber is in place that is inside your guards, even that the little factory bash plate thing is in place. A new fan and shroud will help as will servicing your viscous hub. A could check to know if it's your rad or thermostat is temp drop across the rad.
-
The Following 3 Users Say Thank You to nissannewby For This Useful Post:
growler2058 (22nd December 2013), Stropp (22nd December 2013), Winnie (22nd December 2013)
-
22nd December 2013, 12:02 PM
#2003
Patrol God
Yes my temps were just starting to creep up with all this hot weather we were having so pulled the radiator and shroud, it was full of crap, even the aircon condenser. Serviced the hub too and although there has been no more extreme hot temps it seems to run slightly cooler now.
2003 gu3 td42tdi sold 😞 bloody gvm towing crap. Bt50 3500kg gvm.
-
-
22nd December 2013, 12:09 PM
#2004
The 747
Originally Posted by
nissannewby
A could check to know if it's your rad or thermostat is temp drop across the rad.
How would I measure that?
-
-
22nd December 2013, 01:05 PM
#2005
Dribble Master
Originally Posted by
Winnie
How would I measure that?
Tape measure
-
The Following 3 Users Say Thank You to Clunk For This Useful Post:
93patrol (22nd December 2013), BigRAWesty (22nd December 2013), growler2058 (22nd December 2013)
-
22nd December 2013, 01:54 PM
#2006
BIG & BALD
Still two days of work left
2011 GU8 ST 3.0 CRD, ARB Bullbar with IPF spotties, scrub bars and side steps, Snorkel, Dual Battery system, Waeco fridge, Turbo Timer, ARB Roof Rack with 5 IPF spotties across the front, Custom full Leather Bucket seats, DPchip, 3" Taipan exhaust, ARE Intercooler & scoop, Autron EGT/Boost and dual volt gauges, ARB front locker.
-
-
22nd December 2013, 01:57 PM
#2007
Patrol God
Originally Posted by
megatexture
How did that happen mate?.
Have bad varicose veins to start with, and one come up and popped a a month or so ago but stopped bleeding with pressure.
Doc said pressure and all will be good
Went to remove the compression bandage yesterday and the scab had bleed into the sock and it tore Off, making a hell of a mess and blood and crap everywhere!!
-
-
22nd December 2013, 06:08 PM
#2008
Patrol God
Originally Posted by
Winnie
How would I measure that?
One of those infrared temp guns its the easiest or you can get those stick on thermometer they use in fish tanks.
-
-
22nd December 2013, 06:09 PM
#2009
The 747
So do you mean measure the front of the radiator and the back after going for a drive?
Or top hose and bottom hose?
-
-
22nd December 2013, 06:16 PM
#2010
Patrol God
Top and bottom hose mate. If the bottom is cold all good if there isn't much difference between the two then your rad could be the cause
-
The Following 2 Users Say Thank You to nissannewby For This Useful Post:
growler2058 (22nd December 2013), Winnie (22nd December 2013)