Welcome to the Nissan Patrol forum. To post a question and to see less adds on the forum then you will have to register
first. We are an easy going friendly forum so join in the conversations and feel free to ask any questions.
Become a forum sponsor for only $20 and see no adds with faster page loading times and many extras benefits.
That's nothing on the fire we had today =) pile would have been 10m high and 30m round. We protected the shed that was close by and stopped it from spreading
The Following 7 Users Say Thank You to Avo For This Useful Post:
Bob (1st December 2014), Clunk (30th November 2014), growler2058 (30th November 2014), jack (30th November 2014), mudnut (30th November 2014), mudski (30th November 2014), Stropp (30th November 2014)
Found out on friday that my block, cam and crank are all A OK
The cam and crank are just going to be linished, that means there is basically no wear so factory spec bearings can be used,
Although it only has 302 thousand km on it, to still have cross hatching on the bores, no wear on the valve train, crank and cam still within factory spec, it has had a lifetime of good clean oil and good oil pressure. The little bit of wear on the big ends just before top dead center when it fires and piston damage is all related to lots of boost.