My draws.....?

[Bloodyaussie]

Not what you think ya dirty buggers. ..

Been slowly building my own draws as the first ones I did were crap and after a couple of tough trips started to fall apart.

This time I have built in a 12v compressor and tank plus some other goodies.

More to go but hope to have it all fitted by the end of the week.

Must thank 04off and Rodney for advice.
1369717734132.jpg
1369717762805.jpg
1369717791197.jpg
1369717812277.jpg
1369717831690.jpg

[mudski]

Chit.......

[threedogs]

Wooden reg grundies, I get it. RLMAOL
Shite the stuff you come up with, gold absolute Gold

[Bloodyaussie]

Now working on the wiring that goes into the top box .... hard when kids are driving you nuts and apparently it is your turn to cook...? bugger.

Mark I know where you live mate.

[BigRAWesty]

16mm ply...
It'll weight a ton..
12 is way enough for a simple draw system, but yea, a bit late now..

Looks good though.. check the sound levels before you install, if its loud out of the car, it'll be a PITA once in an enclosed area.. but plenty of options to reduce unwanted noise..

Kallen Westbrook
Owner of
Westy's Accessories

[Bloodyaussie]

Only part of it is the thicker ply for the top that will have the fridge on it and the base.. the rest is much thinner.

As for the noise from the compressor I had a 240v one in there before and only used it for airing up or cleaning filters and my gardening gear.

[mudski]

Mark I know where you live mate.

You don't now. I shifted this week. Muwahahaha!!! I know where you live though...

[taslucas]

Looking good cuddles


Now get inside and COOK!

[AB]

Looking neat so far mate, I like it!

[Teamdjbilo]

This looks awesome would love to see this in the car when done give me a few ideas for myself.