-
7th May 2013, 11:40 PM
#1
seat problem
Need help, are there bench seats that can be fitted to a 2012 ute? Need to know if its legal, and how I might go about it? Any help would be awesome cheers
-
-
7th May 2013 11:40 PM
# ADS
Circuit advertisement
-
8th May 2013, 01:41 AM
#2
Dribble Master
Should be able to get them out if a DX maybe...... But you will need to get your compliance plate changed if its only been registered as a 2 seater
Don't slap it, tap it!!!!
-
-
8th May 2013, 08:22 AM
#3
Travelling Podologist
See my response in the other thread where you asked the same thing.
Cuppa
2006 4.2TDi ex-Telstra Remote area Camper. 425w roof mounted solar, 360Ah Aux batts, BCDC1240, Onboard hot & cold pressurised & filtered water, (25 litre hot water calorifier), ARB fridge, ARB freezer, Built in kitchen, heaps of easy access storage, 240v, 3” Genie exhaust + dynotune, 2” lift, 3900kg GVM upgrade, second glovebox, ROH Blaktrak steel wheels, Bridgestone D697's (now Toyo RT's), Redarc gauges/pillarpod, Hema HX-1, Icom 450 CB, dual rear view cameras, Onboard 30amp Victron mains charger, second glovebox, dual seat conversion, TPMS, Boss PX7 onboard air with 9 litre tank, 350w inverter, Steel bullbar, Harrop Eaton diff lock (front), Warn winch, Snorkel, Dual spares , 160 litre water tank, 180 litre fuel in two tanks (approx 1200km range) 2010 Tvan Tanami. (incl another 70 litre water tank) with matching wheels/tyres (& 3rd spare)
A Nomadic Life (Blog)
-
The Following User Says Thank You to Cuppa For This Useful Post:
jenkinsdrew (9th May 2013)