Power window control module

[taslucas]

thanks darren ill let him know. lol we dont even have jaycar around here but there is a little electronics shop that i think is a jaycar dealer, it should work

[MudRunnerTD]

I ground the edges of the box off to open the sealed box and then taped it up when I was done. He has nothing to loose, it's knackered so,open it up before he takes it to the guy. Jaycar is neither here or there, the electronics old school bloke is your man mate.

Good luck

[NissanGQ4.2]

Tell him to take a pic of it and send it to you so we know what your / he is actually talking about Lucas.

But yeh as Darren said an old skooooool electronics bloke might be able to fix it cheaply

[Yendor]

What is the problem with his old one?. They do suffer from dry solder joints.

After you open it up have a look at the connections on the printed circuit board, even run a hot soldering iron over all of them.

Mid 90 model Skylines use the same control module.

[taslucas]

Thanks heaps rod, I only have vague details as to why he wants a new one. I'll pass that on cheers. Probably get hold of a skyline one easier if he actually needs a new one.

FanTapstic!

[lachiek]

How'd you go with this? If you cracked it open post pic's of the circuit board. All the other boards I've seen in my GQ are really easy to diagnose problems and work on.